360 magnum roller lifters

does anybody know who makes solid roller lifters for 360 magnum. seems they are different than la engines.

There is a fellow here in La that takes the hyd lifters and makes them into solids so you can use the stock holding gear. We tried to use dif solid lifters but cound not get the clearance needed to work properly. Even tried machining the tops of the lifter bores to do away with the bog-bone holders so the link bars would clear... couldnt come up with a solution. I am waiting on a set of the converted rollers as we speak...

I'm running converted hydraulics.... a buddy of mine "fixed" them. I don't know of any place that's actually making them. I was running Rhoads with them adjusted way down to super-low lash - but they were still noisy.

sealed power makes them...
way better off with the mopar perf. from Jeg's