need pictures of homemade air pans

I need ideas to fab up a dual quad air pan
I'm clueless
I bough the aluminum and Moroso foambut need ideas.

this is the pan I made . I have used it with a single 4 barrel and with my dual quad modman , filter base bolts in . It is made of heatproof fibreglass , used in marine exhaust work and high density seat foam. this is under a six pack scoop .
IMO aluminium tray will transfer heat almost as fast as no tray . one of the guys on here does repop glass air cleaners , like the A12 and freshair units but can set them to suit your carb spacing and carb type .early AFB or later eddy/afb/holley . paintitblack(?)

Tex

This is the moroso aluminum and foam for single 4bbl. You can get it for dual 4bbl.............

4" drop air cleaner base sheet of. 040 aluminum and some moroso foam.
The hold down is a handle off of the side of an aluminum harbor freight floor jack.
Found out that the foam cuts awesome with the bandsaw.
Added a 4" air filter and 3/4" thick ring of air pan foam to the underside of the hood that keeps the filter in place.
Saw a .2 gain and zero change by adding the air filter.
I made the pan as big as the hood scoop.