Thumbs up for BPE ! -------UP DATE

Posted By: draginmopars

Thumbs up for BPE ! -------UP DATE - 07/19/13 07:25 PM

1st stroker kit went smooth

2nd stroker kit slight delay

Rod says he checks all orders before going out

Well the custom pistons are packaged by the piston company along with the pins and rings,in ONE box

Rod called and said while checking them the rings were wrong.

will be a one week delay

That is fine by me,cause, I wouldn't have been very happy, to stop in the middle of a build, and wait on rings.

better the HE found the problem,than me,
when I went to fit the rings on the pistons

Thanks Rod..

p.s.

all crank and rod specs right on

Also noticed that the cranks are drilled and finished for a standard trans bushing.

Posted By: J_BODY

Re: Thumps up for BPE ! - 07/20/13 12:57 AM

Why you going the "thump" him... You seem quite happy?

Posted By: AndyF

Re: Thumps up for BPE ! - 07/20/13 01:51 AM

I'm in the market for a 4 inch 360 crank with 2.10 rod journals. Going to build me a SB race engine. I'll have to give Rod a call and see what he has.

Posted By: draginmopars

Re: Thumps up for BPE ! - 07/20/13 02:13 AM

Quote:

Why you going the "thump" him... You seem quite happy?

fixed it for ya

it was a cross between a bump and a thumbs up

Posted By: draginmopars

Re: Thumps up for BPE ! - 07/30/13 12:07 AM

ONE week just like he said

He got the piston rings on friday. I got them today

That's so great that a company does what it says

Way to go.... Rod

Thanks,

Now to convert this pile of parts into a torque monster..

Posted By: mshred

Re: Thumps up for BPE ! - 07/30/13 12:56 AM

Rod is a class act! When I ordered my custom pistons from him, the piston manufacturers were giving him a bit of a run-around. Rod made it look like it was his fault even though I told him I understood there was so little he could do, and he made sure to keep on top of it every day so that I got my stuff asap and the way I had ordered it.

Definitely need more guys like him in this industry.

Posted By: dwayne welder

Re: Thumps up for BPE ! - 07/31/13 11:27 AM

Who is BPE?

Posted By: Dunnuck Racing

Re: Thumps up for BPE ! - 07/31/13 02:09 PM

Bloomer Performance Engineering . He sells small block Mopar rotating kits exclusively
Keith