SB crank trigger picture?

Posted By: AndyF

SB crank trigger picture? - 07/13/13 07:00 PM

Anyone have a good picture of a crank trigger mounted on a SB Mopar? I looked on the MSD website and they don't show anything mounted on an engine. Just trying to figure out where the bracket kit mounts on a SB.

Posted By: 340Cuda

Re: SB crank trigger picture? - 07/13/13 09:48 PM

I am not sure if this is a "good" shot or not. It will go on either side and I'll end up running it on the passenger side when I am done.

Bill

Attached picture 7775317-IMG_2191.JPG

Posted By: DavidDean

Re: SB crank trigger picture? - 07/13/13 10:43 PM

This is a poor picture. I mounted mine behind my motor plate.Maybe you can see the spacers I use.

Attached picture 7775375-cranktriggermount.JPG

Posted By: tubtar

Re: SB crank trigger picture? - 07/14/13 06:18 AM

I think I got one......sort of.
BBC trigger kit with pick up bracket mounted to motor plate

Attached picture 7775823-cutting031.jpg

Posted By: 408Dust

Re: SB crank trigger picture? - 07/14/13 01:23 PM

Posted By: ADakotaRTGuy

Re: SB crank trigger picture? - 07/14/13 01:23 PM

Magnum timing cover, but should not make a difference.

Posted By: 408strokerdart

Re: SB crank trigger picture? - 07/14/13 05:24 PM

MSD's bracket is designed to work on either side. It has an extra hole to accommodate this.

Posted By: AndyF

Re: SB crank trigger picture? - 07/14/13 06:48 PM

I see that now, especially in the last picture. The picture on the MSD site doesn't show the extra hole. They must have used a generic picture in the illustration that I looked at.

Posted By: SB412DUSTER

Re: SB crank trigger picture? - 07/15/13 05:15 AM

Here's mine, I modified it for the belt drive adjuster and the notch on the out side is for clearance on my vacuum pump

Attached picture 7776950-cranktrigger2.JPG

Attached picture 7776950-cranktrigger2.JPG

Posted By: AndyF

Re: SB crank trigger picture? - 07/15/13 05:34 PM

Looks like a nice clean install. Is that a Weber belt drive?

Posted By: SB412DUSTER

Re: SB crank trigger picture? - 07/16/13 06:46 AM

Quote:

Looks like a nice clean install. Is that a Weber belt drive?

Yes a short deck version

Posted By: AndyF

Re: SB crank trigger picture? - 08/07/13 02:27 PM

I picked up a MSD crank trigger kit. Seems to fit okay after some minor modifications. Not a big fan of some of the parts in the kit but nothing that I can't fix.

Attached picture 7805712-DSC_8548(Large).JPG

Attached picture 7805712-DSC_8548(Large).JPG

Posted By: TrWaters

Re: SB crank trigger picture? - 08/07/13 09:34 PM

Nice looking front cover.

Posted By: AndyF

Re: SB crank trigger picture? - 08/07/13 11:03 PM

1 of 1!

Posted By: HEMIFRED

Re: SB crank trigger picture? - 08/07/13 11:28 PM

This is the proto type that Direct Connection developed for their small block crank trigger. Dave Koffel gavce it to me.

Posted By: HEMIFRED

Re: SB crank trigger picture? - 08/07/13 11:28 PM

the wheel

Posted By: 340Cuda

Re: SB crank trigger picture? - 08/08/13 03:29 AM

Quote:

1 of 1!

Are you planning to go to production with them?

Looks nice, like the O rings a lot.

Bill

Posted By: AndyF

Re: SB crank trigger picture? - 08/08/13 04:38 AM

Should be available within a few weeks. Hughes Engines will have them.

Posted By: J_BODY

Re: SB crank trigger picture? - 08/08/13 06:35 AM

Quote:

Looks like a nice clean install. Is that a Weber belt drive?

....got you thinking huh?

Posted By: 80arrow

Re: SB crank trigger picture? - 08/08/13 02:48 PM

Quote:

Here's mine, I modified it for the belt drive adjuster and the notch on the out side is for clearance on my vacuum pump

Probably a dumb question but how do you set up the timing to switch it to the passenger side? The only way I can time mine with the crank trigger on the drivers side and see the timing marks is pull the radiator because of my procharger.

Posted By: Bad340fish

Re: SB crank trigger picture? - 08/09/13 12:11 AM

Quote:

1 of 1!

It looks great, what headers are those?

Posted By: AndyF

Re: SB crank trigger picture? - 08/09/13 02:39 AM

Doug's headers.