Added walls to my dry sump pan

Thought I could show what I have added to my dry sump pan to get each pick up a close to sealed of pan section.
Now the oil will mostly enter each AN12 screen scavenge pump.
I believe that the front pick ups would suck much more air with an open pan design.




Added two AN8 for oil return from B1 heads

I did the same thing on my R3 block pan.. but I only
added a single wall at the #3 cap due to I only have
2 pick ups in the pan.... looks good

nice Tom, when you think you will have that thing ready to race?

Hi Tony, Sometime during aug. as I am still working with a big project at our company. I am still spending a couple of hours each day in the garage.