Posted By: bonefish
reusing cometics ? - 07/07/13 05:16 PM
there are some spots where the black coating has came off and the metal is showing.can this gasket be cleaned up and reused with some copper spray?
Posted By: bonefish
Re: reusing cometics ? - 07/07/13 05:25 PM
does all the black coating need to be removed?
Posted By: dvw
Re: reusing cometics ? - 07/08/13 08:06 PM
I reused mine with the coating coming off in spots. I drilled the rivets out wiped them down,and pulled off the little strings of loose coating. Sprayed all sides and reinstalled. 14.8-1, working fine.
Doug
Posted By: rebel
Re: reusing cometics ? - 07/09/13 07:00 AM
i've reused a set of cometics 9 times. a lot of the coating had come off but they still worked with copper coat.
Posted By: Al_Alguire
Re: reusing cometics ? - 07/09/13 05:21 PM
Same here. Clean them well and reuse them with copper coat.
Posted By: Anonymous
Re: reusing cometics ? - 07/09/13 07:18 PM
Guys though it may work CopperCoat is not the best product for that application--we always use Holomar Spray on Cometics--it seals water like a bank vault. Coppercoat is for heat transfer and was best for old style metal head gaskets. Holomar spray is 10 times better sealer.
Posted By: Al_Alguire
Re: reusing cometics ? - 07/09/13 09:37 PM
Copper Coat has been working well for us. 15+ to one compression and 4 digit horsepower and no issues..Just my experience
Posted By: dogdays
Re: reusing cometics ? - 07/09/13 10:14 PM
it's spelled H-Y-L-O-M-A-R
R.