Posted By: JERICOGTX
PSI valvesprings for W8? - 04/10/13 01:18 AM
A buddy is getting his W8 motor ready to race after 5 years. The motor currently has PSI valvesprings Part# DR1024. PSI no longer makes these springs. Does anyone have a spring part# that would replace these?
Thanks.
Jeff
Posted By: W5DART66
Re: PSI valvesprings for W8? - 04/10/13 01:28 AM
I need specs of cam and what IH spring is at now but I would take guess.
It's something close to this.
http://www.jegs.com/i/Manley/660/221425P-16/10002/-1
Posted By: Al_Alguire
Re: PSI valvesprings for W8? - 04/10/13 01:28 AM
Go to PAC sorings..You wont be sorry, best stuff out there.
http://www.racingsprings.com/
Posted By: 79_W200
Re: PSI valvesprings for W8? - 04/10/13 02:32 AM
my set of Pac springs checked same at end of season as when installed
Posted By: clonestocker
Re: PSI valvesprings for W8? - 04/11/13 04:25 AM
Hey Jeff,
Is that the Black Dart?
Posted By: 440W8 Duster
Re: PSI valvesprings for W8? - 04/11/13 11:32 AM
Hi! Jeff, Monte is going out to race again!Say hi to Zane.Hope to see you guys at Marion this year.