Posted By: cesar perez
B1 HEAD PORTER - 04/02/13 03:15 AM
LOOKING FOR A CNC HEAD PORTER IN SOUTH FLORIDA
B1 HEAD PORTER
Posted By: loaderpro
Re: B1 HEAD PORTER - 04/02/13 03:30 AM
Send them to Koffel. Tell him how fast youwant to go and He will set you up!
Posted By: EchoSixMike
Re: B1 HEAD PORTER - 04/02/13 05:12 AM
Don't know anybody south, sorry.
Mine were done by Koffels. S/F.....Ken M
Mine were done by Koffels. S/F.....Ken M
Posted By: Cab_Burge
Re: B1 HEAD PORTER - 04/02/13 06:39 AM
Quote:
Don't know anybody south, sorry.
Mine were done by Koffels. S/F.....Ken M
Mine to, probally all by hand, not CNC like Jeffs looks like 
Posted By: Al_Alguire
Re: B1 HEAD PORTER - 04/02/13 06:43 AM
Ummm. Dont know of anyone down there but there are some very knowledgeablke people who can get them done. Depends on how much you wanna spend and how much power ya want. Or go with a Mopar guy
Posted By: Jet Doc
Re: B1 HEAD PORTER - 04/02/13 03:11 PM
I just got mine back from Scott Brown in Michigan, they turned out beautiful!
Posted By: Jet Doc
Re: B1 HEAD PORTER - 04/02/13 03:12 PM
another pic
Posted By: Jet Doc
Re: B1 HEAD PORTER - 04/02/13 03:13 PM
last one
Posted By: Doc Schwarz
Re: B1 HEAD PORTER - 04/03/13 04:22 PM
Sent mine to Koffels in MI. Rich had them for 6 mos. Got them back
and had water leaks in both of them. Cleaned them up a little to
good. He had them fixed and back to me. Back then, 2005, Rich had
the job done down the street at another machine shop, and they went
out of business. Leaks were repaired buy?????? Didn't ask to much
as he really felt bad about it. Just make sure they are doing the work. Otherwise OK.
and had water leaks in both of them. Cleaned them up a little to
good. He had them fixed and back to me. Back then, 2005, Rich had
the job done down the street at another machine shop, and they went
out of business. Leaks were repaired buy?????? Didn't ask to much
as he really felt bad about it. Just make sure they are doing the work. Otherwise OK.
Posted By: B3422W5
Re: B1 HEAD PORTER - 04/03/13 06:24 PM
Quote:
I just got mine back from Scott Brown in Michigan, they turned out beautiful!
I am almost positive Scott sends all that kinda stuff out, and I believe Modern does his work.
Posted By: ro23car
Re: B1 HEAD PORTER - 04/03/13 08:20 PM
mch ftw.
Posted By: JAKE68
Re: B1 HEAD PORTER - 04/03/13 08:24 PM
Quote:Quote:
I just got mine back from Scott Brown in Michigan, they turned out beautiful!
I am almost positive Scott sends all that kinda stuff out, and I believe Modern does his work.
yep
Posted By: W5DART66
Re: B1 HEAD PORTER - 04/03/13 08:29 PM
Quote:
Sent mine to Koffels in MI. Rich had them for 6 mos. Got them back
and had water leaks in both of them. Cleaned them up a little to
good. He had them fixed and back to me. Back then, 2005, Rich had
the job done down the street at another machine shop, and they went
out of business. Leaks were repaired buy?????? Didn't ask to much
as he really felt bad about it. Just make sure they are doing the work. Otherwise OK.
back then it was done by ETperformance
Posted By: ChevyTS
Re: B1 HEAD PORTER - 04/04/13 12:48 AM
I have ported a few sets of the B1 original heads. What is your intended use?
Posted By: LA360
Re: B1 HEAD PORTER - 04/04/13 02:31 AM
Where is Mike Duke located?
Posted By: mopartoby
Re: B1 HEAD PORTER - 04/04/13 04:44 AM
I purchased a set of b1 mc castings from koffels in jan of 2012 during there winter sale. Turns out they have porosity issues not koffels fault by any means but if anyone on this board purchased from the same batch beware!!....that is all.
Posted By: Al_Alguire
Re: B1 HEAD PORTER - 04/04/13 05:39 AM
Quote:
Where is Mike Duke located?
Indianapolis Indiana.
Posted By: 506RR
Re: B1 HEAD PORTER - 04/04/13 01:03 PM
My B1 Original Heads are currently at MCH being ported. I am expecting a call any day to say that they are done. Jeff did a great job on the 2 sets of Indy Heads he has ported for me.
Posted By: 440GTX
Re: B1 HEAD PORTER - 04/04/13 01:15 PM
Chuck and pete at best machine they know how to make power 8 .25 1.20 60ft at 163 3100 pounds all horse power 572 b1 give them a call!!!!!!
Posted By: MR_P_BODY
Re: B1 HEAD PORTER - 04/04/13 01:22 PM
Quote:Quote:
I just got mine back from Scott Brown in Michigan, they turned out beautiful!
I am almost positive Scott sends all that kinda stuff out, and I believe Modern does his work.
When I bought my B1 M/Cs from Scott, MCH did the port work
Posted By: n20mstr
Re: B1 HEAD PORTER - 04/05/13 06:00 AM
Scott Brown almost done with mine.....
But im not allowed to post pics....
But im not allowed to post pics....
Posted By: ccarson
Re: B1 HEAD PORTER - 04/06/13 06:02 PM
I agree
Posted By: B1KILLER
Re: B1 HEAD PORTER - 04/06/13 08:15 PM
Go to Best Machince, send intake also. Amazing
things he does with the intake, and heas.
You will pay, but you wont have no issues, trust
me on that. $pend it once, and get it done rite.
Ignore my reply to ur PM. Hes going to redo my
heas in the near future, when i'm ready
If ur the Cesar I've meet in person, PM me ur #.
This is what a local guy in NY cost me $$$
things he does with the intake, and heas.
You will pay, but you wont have no issues, trust
me on that. $pend it once, and get it done rite.
Ignore my reply to ur PM. Hes going to redo my
heas in the near future, when i'm ready
If ur the Cesar I've meet in person, PM me ur #.
This is what a local guy in NY cost me $$$
Posted By: B1KILLER
Re: B1 HEAD PORTER - 04/06/13 10:31 PM
I will get you the # for the guy in Belle Glades that
has Cano's Preditor motor nda 7's, never heard anything
bad about him, left a message on Cano's phone.
If he don't get back to me soon, I will reach
out to my family to get a hold of him.
has Cano's Preditor motor nda 7's, never heard anything
bad about him, left a message on Cano's phone.
If he don't get back to me soon, I will reach
out to my family to get a hold of him.
Posted By: B1KILLER
Re: B1 HEAD PORTER - 04/08/13 04:31 PM
I got that # for Fred in Belle Glades, call my phone.
He does some great work, as we have seen with
Canos motors, good combos.
He does some great work, as we have seen with
Canos motors, good combos.
Posted By: Al_Alguire
Re: B1 HEAD PORTER - 04/08/13 05:06 PM
Hmmmm...My intake is out of the box stock and unported, except to change the port openign. Plenum is untouched. Seems to make good power this way. The B1 intake is an AWEFULLY large intake cannot imagine any guys here really needing anything done to one. But what do I know, maybe I am leaving power on the table
