Moparts
Eddy RPM CNC program
Posted By:
harborracer
Eddy RPM CNC program -
03/04/13
03:56 AM
Who has a good CNC program for Eddy RPM's ?
Posted By:
Sport440
Re: Eddy RPM CNC program -
03/04/13
04:36 AM
Modern cylinder head has one that is as good as it gets, for those heads.
Posted By:
Cab_Burge
Re: Eddy RPM CNC program -
03/04/13
04:57 AM
Quote:
Modern cylinder head has one that is as good as it gets, for those heads.
Mine work good
Posted By:
viperblue72
Re: Eddy RPM CNC program -
03/04/13
10:39 AM
Small block?
Posted By:
DaveRS23
Re: Eddy RPM CNC program -
03/04/13
02:42 PM
MCH did mine a few years ago. I gained 2.5 MPH in the 1/8th with no other changes.
Posted By:
B G Racing
Re: Eddy RPM CNC program -
03/04/13
03:21 PM
We had our's done by Indy in the past.
"The luck of the draw"
© 2024
Moparts Forums