Posted By: Sammy
who has bought the center link bushings from MR2perfor - 02/23/13 08:11 PM
Has anyone bought the centerlink bushings from Mike
At MR2 Performance.
If so did you modify the centerlink yourself or did
you do it yourself?
Posted By: joshking440
Re: who has bought the center link bushings from MR2perfor - 02/23/13 09:14 PM
Well if I modified it my self how would that be different from modifying it myself.
Most people do it themselves.
Especially if married
Posted By: 68shifter
Re: who has bought the center link bushings from MR2perfor - 02/23/13 09:42 PM
Mikes center links are cheaper than marriage, heck even the champagne room
I have two sets. You can ream them yourself or he can.
Check these out too. I'm going to grab a set at the Indy show, hopefully.
http://monstermopar.com/forum/index.php?topic=1056.0
Posted By: MPerry
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:00 PM
Those look nice!
What is the purpose of the center link bushings?
Posted By: joshking440
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:19 PM
Have you ever taken a center link apart?
Posted By: joshking440
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:28 PM
so you know how bad it sucks
imagine if you took the nuts off and the link just came right off.......
Posted By: MPerry
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:35 PM
Oh so its for a quick release.
Posted By: joshking440
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:37 PM
If fukin Roth had a website I would send you a link so you could see them
Posted By: MPerry
Re: who has bought the center link bushings from MR2perfor - 02/23/13 10:40 PM
I searched and couldn't find anything on them which is why I asked.
Posted By: welkerm
Re: who has bought the center link bushings from MR2perfor - 02/23/13 11:07 PM
Call Mike and discuss it with him. We had him do some stuff on our car and it was awesome. We moved everything as necessary/directed and tacked it in place to fit our oil pan hole then mailed it to him, he worked his magic and sent it back. Fits like a glove, turn to turn steering, and very easy to remove to take of the pan and change/check bearings.
Posted By: OUTLAWSSAA
Re: who has bought the center link bushings from MR2perfor - 02/23/13 11:16 PM
Once you install these on your car, DO NOT tighten the nut like you used to. Just snug the nut up and put the cotter pin in.
Posted By: Bigbeep
Re: who has bought the center link bushings from MR2perfor - 02/24/13 09:31 AM
Nobody has pics of these? Kind of interested in them. Beep
Posted By: Stanton
Re: who has bought the center link bushings from MR2perfor - 02/24/13 03:37 PM
How much is a set of those?
Posted By: mr2performance
Re: who has bought the center link bushings from MR2perfor - 02/24/13 05:39 PM
$100 for 4 or $25 each Mike
Posted By: VernMotor
Re: who has bought the center link bushings from MR2perfor - 02/24/13 06:01 PM
Will these lower the center link a little ?
Posted By: mr2performance
Re: who has bought the center link bushings from MR2perfor - 02/24/13 10:28 PM
I don't have the exact dimension in front of me, but they end up in almost exactly the same position height wise. Mike
Posted By: Dads426
Re: who has bought the center link bushings from MR2perfor - 02/25/13 01:11 AM
That is a good idea on the step-down on the center link.
I shortened the castle nuts on my lathe so the cotter pin will fit through the hole.
Ain't that the truth!
I just drill out the center link with a 3/4" bit on a drill press. Don't tighten the nuts or the sleeves will bind on the tie rod/pitman arm/idler arm. With a diaper and center link through the pan we have to pull it off many times through the season. That link just slips on and off. Those bushings are the cats meow...
