Neil Chance,Coan or some other brand converter?

Posted By: Georg

Neil Chance,Coan or some other brand converter? - 02/06/13 12:48 PM

Hy guys

Wanted to hear your comments about converter choice.As this R5/P7 motor is tricky, runs in very high RPMs and have quite narrow power band then it needs very good converter behind it...
I picked up Neil Chance and Coan right now.I sended quotes out and wait their comments.
What you guys suggest

Thanks
Georg

Posted By: 408strokerdart

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 02:23 PM

A1 has experience with that combo as well.

Posted By: tboomer

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 02:25 PM

Pm Lenny at Ultimate...He is a board sponser..

Posted By: Mopar_Rich

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 05:05 PM

Talk to Walker at COAN. Non better.

Posted By: 80arrow

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 07:13 PM

Quote:

Pm Lenny at Ultimate...He is a board sponser..

Posted By: Eric

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 07:41 PM

Quote:

Quote:

Pm Lenny at Ultimate...He is a board sponser..

X2

X a billion....

Posted By: Diablo

Re: Neil Chance,Coan or some other brand converter? - 02/06/13 08:00 PM

Neal Chance has amazing customer support. With my application finding the right stahl/convertor is not easy and they have changed it multiple times at no charge. They also said they would continue this until I was happy.

Posted By: blownEFI

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 01:23 AM

Quote:

Neal Chance has amazing customer support. With my application finding the right stahl/convertor is not easy and they have changed it multiple times at no charge. They also said they would continue this until I was happy.

x2. Marty will bend over backwards for you.

Posted By: mac56

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 01:24 AM

Quote:

Neal Chance has amazing customer support. With my application finding the right stahl/convertor is not easy and they have changed it multiple times at no charge. They also said they would continue this until I was happy.

Posted By: hemi-itis

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 01:29 AM

I went to Joe at PROTORQUE.One of the few on Long Island that can build a converter.Customer service is GREAT!!!

Posted By: hustlin hoosier

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 03:05 AM

We run ati and we tried a coan last year and was not happy , they built what they wanted and did not really care what I wanted they actually built what I said I did not want $1200 waste of time and money.

Posted By: HEMIFRED

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 04:04 AM

Chance two piece? they are the tops plus considering where you live at least you might be able to do adjustments yourself

Posted By: Al_Alguire

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 08:18 AM

Well for something like that motor if you want the BEST then call A1. They are great to work with and understand high winding low torque deals. Look at Comp, and SS and you will find almost everyone using A1

Posted By: LA360

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 08:56 AM

You are probably going to need a 7" converter, I wouldn't go anywhere other than A1 for something like that. I second what Al said!

Posted By: Georg

Re: Neil Chance,Coan or some other brand converter? - 02/07/13 12:48 PM

Ok thanks guys.I think a bit...