cnc or hand port job 440-1

Posted By: earthmover

cnc or hand port job 440-1 - 01/25/13 02:25 AM

going to have my 440-1s done who what and why is the ?????right now they are on my 451 but plan on a bigger ci later on this year if things work out maybe a 512 not sure but would like to get all I can get..

Posted By: n20mstr

Re: cnc or hand port job 440-1 - 01/25/13 03:21 AM

Quote:

going to have my 440-1s done who what and why is the ?????right now they are on my 451 but plan on a bigger ci later on this year if things work out maybe a 512 not sure but would like to get all I can get..

Scott Brown did my 440-1's
with a "street" roller cam, my car is right there with combinations that have more cam and lighter weight,
I have been 5.40's at 3500 and first time out at 3330 the car went 5.30's Im sure a little more nitrous or tuning will put the car in the 20's

Posted By: earthmover

Re: cnc or hand port job 440-1 - 01/25/13 04:14 AM

thank you ..

any contact info for him??? would be great

Posted By: 383man

Re: cnc or hand port job 440-1 - 01/25/13 06:04 AM

Dwayne Porter did some work on my EZ heads for me and it is exellent work. He did hand porting as he is one of the best there is. I dont think he has a CNC machine. Ron

Posted By: MR_P_BODY

Re: cnc or hand port job 440-1 - 01/25/13 06:34 AM

Send them to Jeff at Modern to have them CNC

Posted By: an8sec70cuda

Re: cnc or hand port job 440-1 - 01/25/13 02:09 PM

I'd send them to Dwayne Porter at Porter Racing Heads. He did an outstanding job on my Indy SR heads...he's pretty good a spec'ing cams too.

If you want them CNC'd, send them to Jeff at MCH.

Posted By: n20mstr

Re: cnc or hand port job 440-1 - 01/26/13 01:38 AM

Quote:

thank you .. any contact info for him??? would be great

buyracingparts.com

there is a contact info part on there were you can send him an email.
whats your car weigh? im 3330, so you can get an idea of how fast you will go....

Posted By: MR_P_BODY

Re: cnc or hand port job 440-1 - 01/26/13 01:52 AM

Quote:

Quote:

thank you .. any contact info for him??? would be great

buyracingparts.com

there is a contact info part on there were you can send him an email.
whats your car weigh? im 3330, so you can get an idea of how fast you will go....

As far as I know Scott never did any porting himself...
when I got my B1M/C heads from him he suggested sending
them to Modern and I did... he use to use a guy named
Duane up our way here for port work

Posted By: Cuda367

Re: cnc or hand port job 440-1 - 01/26/13 03:52 AM

Best bet? send them to someone like Modern for cnc. Then to someone like Porter to have them finished off for your combination. Been there done that. Just gets you the best there is.

Posted By: racerx

Re: cnc or hand port job 440-1 - 01/26/13 12:00 PM

Any contact info for Dwayne Porter?Tried to google it and it came up
http://supercarraces.com/Porterracing.html

Posted By: tboomer

Re: cnc or hand port job 440-1 - 01/26/13 01:50 PM

Here is Dwaynes e-mail addy...
porterheads@gmavt.net

Posted By: earthmover

Re: cnc or hand port job 440-1 - 01/26/13 03:14 PM

Quote:

Quote:

thank you .. any contact info for him??? would be great

buyracingparts.com

there is a contact info part on there were you can send him an email.
whats your car weigh? im 3330, so you can get an idea of how fast you will go....

I think it will come in at 2500lb or under

Posted By: jimmysarrow

Re: cnc or hand port job 440-1 - 01/26/13 03:41 PM

Call Todd at Marsh Performance - Moparts Connection on the Moparts Home Page. He is located in NC , only does Mopar , and his head guy has a pretty good resume. My 440-1 heads looked almost to good to install on the motor.

Posted By: Cab_Burge

Re: cnc or hand port job 440-1 - 01/26/13 07:50 PM

Quote:

Send them to Jeff at Modern to have them CNC

I have had Jeff do two sets of 440-1

He put the 2.25 intakes in them at the same time, the first set made 845 HP at 7000 RPM with a Holley 1050 Dominator on a Indy 440-3 intake,440 block stroked to 526 C.I. with mopar rod sizes, not a very trick piece at all

The dyno heaaders flanges where to small for the ported heads so the motor missed a little from 5200 RPM up, it would have made a little more power and torque if the headers where better

Jeffs CNC programs work good

Posted By: a493demon

Re: cnc or hand port job 440-1 - 01/26/13 08:01 PM

porter is doing my heads right now.

Posted By: earthmover

Re: cnc or hand port job 440-1 - 01/26/13 11:04 PM

they have the 2.25 valves in them now...

Posted By: racerx

Re: cnc or hand port job 440-1 - 01/27/13 01:33 AM

Quote:

Here is Dwaynes e-mail addy...
porterheads@gmavt.net

Thax......i send him an e-mail

Posted By: tboomer

Re: cnc or hand port job 440-1 - 01/27/13 01:35 AM

Never bought a thing from him but talked to him on the phone. Dwayne will treat ya right!!

Posted By: Cab_Burge

Re: cnc or hand port job 440-1 - 01/27/13 06:08 AM

Dwayne told me to send my Eddy RPM to Jeff for his CNC program

He said that if I wanted the max flow from the heads to send them to Jeff at MCH

NO B.S.

I've used Jeff ever since then

Jeff, I hope your doing well, my prayers are with you

Posted By: racerx

Re: cnc or hand port job 440-1 - 02/18/13 04:17 AM

Do Jeff port the intakes to match the heads?..........