Posted By: Adobedude
Indy 360-3 intake T-Stat housing - 01/06/13 03:20 PM
Posted this in Q&A, no response.
I'm swapping from an M1 to an Indy Intake on my Magnum based 408, what T-Stat housing is going to fit? One from an LA intake?
Bolt center on the Indy is 3.25".
Thanks
Posted By: Quicktree
Re: Indy 360-3 intake T-Stat housing - 01/06/13 04:22 PM
I used a regular chrome mopar housing on mine, which everyone said would leak but it hasn't
Posted By: Just-a-dart
Re: Indy 360-3 intake T-Stat housing - 01/06/13 04:35 PM
I'm using this on my Indy 360-14-3r intake. No leaky chrome.
http://chucker54.stores.yahoo.net/mabialwane.html
Posted By: Adobedude
Re: Indy 360-3 intake T-Stat housing - 01/06/13 05:26 PM
440 Source makes a billetz one too for 25.00, but I don't know the bolt spread. Guess it's the same for early LA and big blocks, 3.25".
http://store.440source.com/prodinfo.asp?number=114-1004
Posted By: fishy340
Re: Indy 360-3 intake T-Stat housing - 01/06/13 05:45 PM
Its the same exact as a sb chevy.The mopar ones leak unless you use the one w an oring.
Posted By: fishy340
Re: Indy 360-3 intake T-Stat housing - 01/06/13 05:59 PM
I had the mr gasket one and it was fine no leaks and cheap.I bought a black csr one w the swivel so i could aim it and match the color of my motor.The csr one does have an oring.Neither leak.
Posted By: fishy340
Re: Indy 360-3 intake T-Stat housing - 01/06/13 06:04 PM
Yes sb gm is exactly the same
Posted By: fishy340
Re: Indy 360-3 intake T-Stat housing - 01/06/13 06:35 PM
U sure its a mp performance one or the so called billet one mancini sells for a sm fortune? Because in my household theres no less then 13 mopars..and the crap one mopar sells is just.that even w rtv.
Posted By: mopar dave
Re: Indy 360-3 intake T-Stat housing - 01/06/13 07:03 PM
I have one from mancini I cound'nt get it seaded even with doubl gaskets with and without rtv. I now have a good one with an o-ring. no leaks.
Posted By: BPE
Re: Indy 360-3 intake T-Stat housing - 01/06/13 07:57 PM
They will interchange, but if you plan to run a thermostat that's where they are different. IIRC the mopar housing has a relief for the thermostat and the SBC has relief milled into the intake.
Rod
Posted By: mopar dave
Re: Indy 360-3 intake T-Stat housing - 01/06/13 08:59 PM
Mine leaked because it would warp. I had two and filed them flat on a regular basis. They were mounted with studs and torqued to spec. They warped anyway. Bought the o-ringed neck and no leaks to date. Been 4 years now.
Posted By: Adobedude
Re: Indy 360-3 intake T-Stat housing - 01/06/13 11:55 PM
Soooo....
It's been established it needs to be O-ringed, but which one is?
Posted By: BPE
Re: Indy 360-3 intake T-Stat housing - 01/07/13 12:13 AM
Are you going to run a thermostat?
Rod
Posted By: Adobedude
Re: Indy 360-3 intake T-Stat housing - 01/07/13 01:36 AM
Since it's SBC it'll be free right?
Thanks for the help.
Posted By: mshred
Re: Indy 360-3 intake T-Stat housing - 01/07/13 05:07 AM
Not to hi-jack the thread, but does anyone know which mopar t-stat housings do use the O-ring for sure??? I run a stat in my LA, so it looks like the chevy one can't work for me