Posted By: dragon
CRIMPING TOOL - 12/30/12 10:31 PM
what crimping tool are you useing to crimp the angle terminals i am talking about the ones that are at a 90 that are spades THANKS
Posted By: bigtimeauto
Re: CRIMPING TOOL - 12/30/12 11:51 PM
i have a GB plier crimp one i cut the end off:
Posted By: bigtimeauto
Re: CRIMPING TOOL - 12/31/12 12:59 AM
no problem, what are you working on a ARC switch panel? thats the only thing i have ever used the flag female spades on.
Posted By: Jeremiah
Re: CRIMPING TOOL - 12/31/12 01:35 AM
To be honest I bought some in a bulk order for the shop and never really found a satisfactory way to crimp them so they sit in the organizer unused. I thought they would be nice for wiring a relay in a tight space. My favorite crimp on terminals are the heavy gauge "high temp" solder-less deals (with heat shrink of course).
I am too low rent to use amphenol or other milspec connectors, especially when all of my low rent electronic devices use 1/4" space terminals, etc. Living in the desert has it's advantages. When I lived East of the Mississippi River I could hear my electrical connections corroding if I listened hard enough.