Posted By: SB412DUSTER
Scotty/Dustedu's 440 W9 rp - 12/25/12 12:02 AM
Hey Scotty I just finished your engine, just in time for Christmas 
Scotty/Dustedu's 440 W9 rp
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 12:04 AM
next one
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 12:05 AM
last one
Time to try it out, I cant wait
Time to try it out, I cant wait
Posted By: old yeller
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 12:10 AM
And on christmas eve....Nice!!
Posted By: sixpackgut
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 12:38 AM
wow! and its as big as it looks!
Posted By: Dustedu
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 12:55 AM
Oh Yeah!!!!! Merry Christmas to me!!!!
Thanks Laverne!!! I can't wait either....gotta get that beast to dyno and back in car...
Whatever I bring to you for Christmas cannot compare.
Thanks Laverne!!! I can't wait either....gotta get that beast to dyno and back in car...
Whatever I bring to you for Christmas cannot compare.
Posted By: Hot 340
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:18 AM
Posted By: W5DART66
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:21 AM
Nice cant wait to see what this girl runs.
Well you may be doing set of my w9s on something.
Well you may be doing set of my w9s on something.
Posted By: greendart408
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:24 AM
, Can you give some details? Please post what it makes for hp and what it runs at the track.
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:36 AM
Quote:
4.185 bore
4.00 stroke Callies crank
Diamond pistons
LSM cam 900+ lift
T&D 1.8 shaft-rockers
Oliver rods
Charlies pan
Barnes 5 stage oil pump
R3 block
RFD rp w9's
Beck sheet metal intake
VDL fuel systems carbs
As soon as we dyno it we will put the numbers on here.
Posted By: SB449VALIANT
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:39 AM
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:39 AM
Sounds killa...what kinda fuel u gonna use for the rp's? And merry xmas.
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:42 AM
Q16 gasoline.
Merry Christmas
Merry Christmas
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:46 AM
Ty
Posted By: 440W8 Duster
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 01:46 AM
Looks good Scotty/Laverne!!!!!
Posted By: one bad fish
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 02:03 AM
That does look killa
Posted By: J_BODY
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 02:07 AM
Can't wait to see some ET's with that thing!!!!
Posted By: WHITEDART
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 02:51 AM
pm sent
Posted By: Sb Valiant
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 03:31 AM
Looks like an 8.0-8.30 1/4 et to me! I am going to guess probaly 1,050 hp n/a!! 
Posted By: Hitman340
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 03:40 AM
Looks nice guys.I look forward to seeing your numbers. 
Merry Christmas. 
Merry Christmas.
Posted By: Sb Valiant
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 04:00 AM
I've wonder this for a while but it looks like your car and it run's very well is this your car SB412DUSTER??? http://www.youtube.com/watch?v=_CQA2YEmTOg
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 04:09 AM
Yes thats mine, I had to let off on that pass it got too far to the left.
I wonder who took that video? I've never seen it before.
I wonder who took that video? I've never seen it before.
Posted By: jim sciortino
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 05:03 AM
Nice lookin' plant right there.
Posted By: rickstershemi
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 05:12 AM
Quote:
Yes thats mine, I had to let off on that pass it got too far to the left.
I wonder who took that video? I've never seen it before.
That place is narrow......Merry Christmas Laverne
Rickster
Posted By: Abodyjohn88
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 07:26 AM
Thanks for making me ruin my keyboard with all the drool!! What is the difference between the w9 and threw w9 raised port? Is there a big difference in flow or horsepower either way looks soooooooo good!
Posted By: DavidDean
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 07:31 AM
Wow this thing should fly!! Otta be lots of fun! More details as they become available. Please.
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 04:46 PM
Quote:
Looks like an 8.0-8.30 1/4 et to me! I am going to guess probaly 1,050 hp n/a!!
It's going in a tube chassis 91 Daytona that should end up pretty lite.
As far as the power we will see but that guess should be pretty close
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 04:56 PM
Rick it is too narrow and short for me. Merry Christmas to you and everyone here.
Abodyjohn88
I have never measured them but it looks like the intake port is about an inch raised and the exhaust is raised about a 1/4.
Abodyjohn88
Quote:
Thanks for making me ruin my keyboard with all the drool!! What is the difference between the w9 and threw w9 raised port? Is there a big difference in flow or horsepower either way looks soooooooo good!
I have never measured them but it looks like the intake port is about an inch raised and the exhaust is raised about a 1/4.
Posted By: Coldart
Re: Scotty/Dustedu's 440 W9 rp - 12/25/12 05:01 PM
Now that is an engine!
Certainly has the proper ingredients to put up some big numbers.
Clean, sanitary assembly - very nice job
With todays parts being so nice, why would you build anything else?
Thanks for sharing! Will be looking for more updates!
Certainly has the proper ingredients to put up some big numbers.
Clean, sanitary assembly - very nice job
With todays parts being so nice, why would you build anything else?
Thanks for sharing! Will be looking for more updates!
Posted By: 1967dartgt
Re: Scotty/Dustedu's 440 W9 rp - 12/26/12 05:32 AM
Wow looks killer, makes me wish I didn't sell my w9rp!
Posted By: EvilB1Dart
Re: Scotty/Dustedu's 440 W9 rp - 12/26/12 10:05 PM
Thats sweet, Laverne! Nice work and Merry Christmas! Hey tell Keith I said hello!
Wes
Wes
Posted By: 493_DART
Re: Scotty/Dustedu's 440 W9 rp - 12/26/12 10:19 PM
Did you happen to see the Mobile tornado yesterday ???
Posted By: bentwheel43
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 12:51 AM
That is a dragster in a can!! http://s93.beta.photobucket.com/user/ben...OV0001.mp4.html 
Posted By: MegaDart
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 12:54 AM
If Laverne had his hands on it it is going to be fast!!
Congrats to you and Scotty hope everyone in Mobile is safe!!
Was that Sharon in the other lane??
Congrats to you and Scotty hope everyone in Mobile is safe!!
Was that Sharon in the other lane??
Posted By: bentwheel43
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 04:02 AM
Yes, she is dead-on most of the time. 
She told me she works on her own car!
She told me she works on her own car!
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 05:27 AM
Quote:
Did you happen to see the Mobile tornado yesterday ???
It was a couple of miles from my house. And I'm Glad
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 05:28 AM
Quote:
Thats sweet, Laverne! Nice work and Merry Christmas! Hey tell Keith I said hello!
Wes
Merry Christmas Wes, I called Keith and told him
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 12/27/12 05:40 AM
Quote:
She told me she works on her own car!
Merry Christmas Max
Posted By: 440W8 Duster
Re: Scotty/Dustedu's 440 W9 rp - 02/25/13 05:36 AM
Laverne or Scotty!! Any hits on the motor yet??
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 02/25/13 08:01 AM
We dynoed it a couple of weeks ago. But have not went down the track yet.
Posted By: jim sciortino
Re: Scotty/Dustedu's 440 W9 rp - 02/25/13 02:39 PM
If it's not proprietary information, how'd it fare on the machine???
Posted By: Guitar Jones
Re: Scotty/Dustedu's 440 W9 rp - 02/25/13 11:40 PM
I've talked to Laverne at the NHRA div 2 finals before, I'm sure he doesn't remember me but his car is nice, very nice and hauls azz. Would love to see the numbers on this engine.
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 02/26/13 03:50 PM
I'm going to let Scotty decide if he wants the numbers from the dyno on here.
Guitar Jones, were you the guy that talked to me about my hood scoop at Valdosta?
Guitar Jones, were you the guy that talked to me about my hood scoop at Valdosta?
Posted By: Guitar Jones
Re: Scotty/Dustedu's 440 W9 rp - 02/26/13 04:02 PM
Quote:
I'm going to let Scotty decide if he wants the numbers from the dyno on here.
Guitar Jones, were you the guy that talked to me about my hood scoop at Valdosta?
No I was talking to you about your front end rack setup. It's been quite a few years.
Posted By: Dustedu
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 03:39 AM
Quote:
I'm going to let Scotty decide if he wants the numbers from the dyno on here.
I don't mind it made 1030@8400 & 718ftllbs @ 7100
This was best pull we managed to get before we ran outta fuel. We didn't have but one five gallon pail and it went quick warming engine and sealing rings. I believe it has more in it we didn't change much we moved timing down two degrees and it lost 15hp/ went up 1.5 from starting timing and it responded with 22hp but we were out of fuel by then. It was also on rich side, we didn't even get to try a jet change. I'm not 100% sure but I believe it has at least 1050 in it!
Thanks again Laverne for the small block of my Dreams!
Also need to thank Curtis Boggs, Steve Lowe, John Beck and VDL fuel systems
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 03:49 AM
Fantastic work boys.I guess Curtis know his stuff w 9 's. Best of luck and one more time awesome effort.
Posted By: Coldart
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 04:22 AM
VERY IMPRESSIVE!
Why would you build anything else?
W9RP's are the only way to go!
Why would you build anything else?
W9RP's are the only way to go!
Posted By: Stroker Scamp
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 05:30 AM
care to share any more of the engine combo?
killer #'s
killer #'s
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 06:10 AM
Quote:
care to share any more of the engine combo?
killer #'s
It's all on the first page
Posted By: Stroker Scamp
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 07:36 AM
yup it was thanks, who again did the heads?
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 02/27/13 07:52 AM
Curtis Boggs at Race Flow development
Posted By: Coldart
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 01:42 AM
Bump
'cause this is the coolest motor posting in long time!
'cause this is the coolest motor posting in long time!
Posted By: WHITEDART
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 04:27 AM
wow that makes some steam. I will be happy if my w8 440 makes 800'es this gives me hope thanks
I will be happy if my w8 440 makes 800'es this gives me hope thanks
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 05:41 AM
We ordered a convertor for it, Then we can try it and see what the track says. Should be fun
Posted By: Otherlane
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 02:00 PM
I would love to see this in a 2800 pound car.
Posted By: 340Cuda
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 03:23 PM
Very impressive!
Are the exhaust ports in the same location on the W9 RP as the other W9 heads?
Bill
Are the exhaust ports in the same location on the W9 RP as the other W9 heads?
Bill
Posted By: SB412DUSTER
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 03:51 PM
Quote:
Very impressive!
Are the exhaust ports in the same location on the W9 RP as the other W9 heads?
Bill
No..The bolt pattern is the same but the ports are 1/4 higher
Posted By: 340Cuda
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 03:58 PM
No..The bolt pattern is the same but the ports are 1/4 higher
LOL, probably just enough to keep my headers from fitting!
Thanks,
Bill
LOL, probably just enough to keep my headers from fitting!
Thanks,
Bill
Posted By: MR_P_BODY
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 05:08 PM
Quote:
I'm going to let Scotty decide if he wants the numbers from the dyno on here.
Guitar Jones, were you the guy that talked to me about my hood scoop at Valdosta?
Might have been me when I meet you down there about
a couple years ago
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 03/02/13 05:59 PM
Can you post the dyno sheet , Im curiouse to see the badboy?
Posted By: 1967dartgt
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 12:40 AM
What are you going to get rp now Andy?
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 01:51 AM
Quote:Oh hell no,Im EXTREMELY happy with mine that Brett did
What are you going to get rp now Andy?
Posted By: Dustedu
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 03:40 PM
Here's a spreadsheet with numbers copied from dyno sheet, the actual dyno sheet had a higher correction factor than we used on this spreadsheet, after entering the weather data in several calculators we feel this is correct.
Posted By: W5DART66
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 04:29 PM
What was the weather the day/time you tested?
Why did you pull the engine so slow? Build like this should be done at 600 rpm per sec
Slower pull will show more HP most of the time.
I think raw # are closer to what this engine really will make in the car going down the track.
Killer engine anyway you slice it can't wait to see how it runs in the car.
Good job Lavern and Scotty
Why did you pull the engine so slow? Build like this should be done at 600 rpm per sec
Slower pull will show more HP most of the time.
I think raw # are closer to what this engine really will make in the car going down the track.
Killer engine anyway you slice it can't wait to see how it runs in the car.
Good job Lavern and Scotty
Posted By: Dustedu
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 06:45 PM
Weather was bad, a front was moving through with severe thunderstorms, Tony was suspicious of the correction factor so we changed it to match calculator. Some of the data is on the sheet...
I would have to ask Tony why he pulled it slow
We' ll see soon what it has on the track, Not Gonna argue...thanks for your insight though
Also need to talk about belt drive gimme a call/ check pm
I would have to ask Tony why he pulled it slow
We' ll see soon what it has on the track, Not Gonna argue...thanks for your insight though
Also need to talk about belt drive gimme a call/ check pm
Posted By: 1967dartgt
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 08:09 PM
What are the cc's of the chamber if you know. Thanks
Posted By: mafo
Re: Scotty/Dustedu's 440 W9 rp - 03/03/13 09:18 PM
shouldn't be to hard to get the converter right with that torque curve
Posted By: fishy340
Re: Scotty/Dustedu's 440 W9 rp - 03/04/13 02:41 AM
Nice brother,u can make some quick $ w that.Not many fear sb mopars around here.