Posted By: slantzilla
Guess what these are for? - 12/06/12 11:20 PM
Got a box in the mail today.
Guess what these are for?
Posted By: Triple Threat
Re: Guess what these are for? - 12/06/12 11:47 PM
An Engine
Posted By: Moparnut426
Re: Guess what these are for? - 12/06/12 11:48 PM
170" Of slanted N20 injected fun?
Posted By: maximum entropy
Re: Guess what these are for? - 12/06/12 11:54 PM
subaru (horizontal)?
Posted By: 340SHORTY
Re: Guess what these are for? - 12/06/12 11:58 PM
Briggs and Stratton 5HP junior dragster engine
Posted By: topside
Re: Guess what these are for? - 12/06/12 11:59 PM
They look kinda short for a S/6...
Posted By: bwdst6
Re: Guess what these are for? - 12/07/12 12:05 AM
A paper weight after about what, two or three seasons…?
Posted By: ChrisJohnston669
Re: Guess what these are for? - 12/07/12 12:08 AM
Quote:
An Engine
hahahaha!
Posted By: JohnRR
Re: Guess what these are for? - 12/07/12 12:10 AM
Black + Decker aquarium pump ?
Posted By: Adobedude
Re: Guess what these are for? - 12/07/12 12:25 AM
Steering column drop.
Posted By: Crizila
Re: Guess what these are for? - 12/07/12 12:28 AM
They're for you to grind in a lot of block clearance. 
Posted By: 85_Ram_4speed
Re: Guess what these are for? - 12/07/12 12:48 AM
Quote:
Black + Decker aquarium pump ?
And here I thought I was the only one that used that line from Hot Rod.
Nice rods, I hope you got 6 of them. Or did you just buy 8 and have two for your lawnmowers.
Posted By: slantzilla
Re: Guess what these are for? - 12/07/12 05:33 AM
Quote:
They're for you to grind in a lot of block clearance.
Yep. Got them from a fellow Slant racer who had Barton make them 15 years ago. He's since decided to go a different direction.
Hemi big end w/Chevy journal size. 6.699" long, stock 225 length. I have a set of +.100" over Ross nitrous pistons set for stock length rods.
This could be a lot of fun.
At $50 for the set I couldn't pass them up, even if they only hang on the wall.
Posted By: Crizila
Re: Guess what these are for? - 12/07/12 03:35 PM
Quote:Wow! Thats aQuote:
They're for you to grind in a lot of block clearance.
Yep. Got them from a fellow Slant racer who had Barton make them 15 years ago. He's since decided to go a different direction.
Hemi big end w/Chevy journal size. 6.699" long, stock 225 length. I have a set of +.100" over Ross nitrous pistons set for stock length rods.
This could be a lot of fun.
At $50 for the set I couldn't pass them up, even if they only hang on the wall.
.
Posted By: Moparnut426
Re: Guess what these are for? - 12/07/12 05:53 PM
Quote:Quote:
They're for you to grind in a lot of block clearance.
Yep. Got them from a fellow Slant racer who had Barton make them 15 years ago. He's since decided to go a different direction.
Hemi big end w/Chevy journal size. 6.699" long, stock 225 length. I have a set of +.100" over Ross nitrous pistons set for stock length rods.
This could be a lot of fun.
At $50 for the set I couldn't pass them up, even if they only hang on the wall.
!!!!!!!!! 50 bucks !!!!!!!!!!
How can you sleep at night??
Posted By: Thumperdart
Re: Guess what these are for? - 12/07/12 06:22 PM
Quote:They`re for one of the unique dudes on this site.
Got a box in the mail today.
When r those going in that thing?
Posted By: slantzilla
Re: Guess what these are for? - 12/07/12 09:00 PM
They came from Will Burns in Virginia. He's got a really slick tube chassis '67 notchback that he has a turbo motor in now. When he gets it all dialed in he may be in the mid 9's with it.
He knew he was never gonna do anything with them and I happen to have a setup for the 6.7" rod length so the final piece of my puzzle is here.
I am going to take them to a place down in Grant Park that builds custom rods and see if we can reduce the size of them a little so they will go into the block through the top, and maybe eliminate some block grinding.
I am on vacation this week and was making some progress on the Daytona, but now I seem to be coming down with the flu.
He knew he was never gonna do anything with them and I happen to have a setup for the 6.7" rod length so the final piece of my puzzle is here.
I am going to take them to a place down in Grant Park that builds custom rods and see if we can reduce the size of them a little so they will go into the block through the top, and maybe eliminate some block grinding.
I am on vacation this week and was making some progress on the Daytona, but now I seem to be coming down with the flu.