What Tunnel Ram Linkage?

Posted By: nz383man

What Tunnel Ram Linkage? - 12/01/12 07:09 AM

I need a linkage for the Dominator carbs on my magnesuim Weiand tunnel ram for the Hemi in my '70 Barracuda, what linkage/setup works best?

Posted By: Cab_Burge

Re: What Tunnel Ram Linkage? - 12/01/12 07:51 AM

I like and use the Enderle kit

I have also used the kit that Weiand makes, not sure if it is still avaible through Summit though

. Do a search on Summit, Jegs, Competion Products and maybe P.A.W.

Posted By: Biginchmopar

Re: What Tunnel Ram Linkage? - 12/01/12 08:03 AM

This is the one I used, scroll down and look at the tunnel ram linkage.

http://www.aedperformance.com/Accessories.htm

Posted By: bigtimeauto

Re: What Tunnel Ram Linkage? - 12/01/12 02:59 PM

Quote:

This is the one I used, scroll down and look at the tunnel ram linkage.

http://www.aedperformance.com/Accessories.htm

^^^^^^^^repackaged enderle kit

yep either of them is the only way.

Posted By: Biginchmopar

Re: What Tunnel Ram Linkage? - 12/02/12 06:14 AM

Quote:

Quote:

This is the one I used, scroll down and look at the tunnel ram linkage.

http://www.aedperformance.com/Accessories.htm

^^^^^^^^repackaged enderle kit

yep either of them is the only way.

YEP!

Posted By: nz383man

Re: What Tunnel Ram Linkage? - 12/02/12 11:30 AM

Thanks Guys

I have emailed AED to see if they will send a linkage to me in New Zealand, if not I'll get them to send it to a US address & I'll get it sent to me in NZ from there.

I have a MR Gasket setup but it flexes too much for my liking.