Moparts

Jesel Belt Drive

Posted By: mopar_mark

Jesel Belt Drive - 10/21/12 08:40 PM



Jewel Belt drive - I have lost the woodruff key from my Jesel belt drive, I know it's 0.125" wide, not sure on other dimension, I thought it may of been 7/16" dia, but doesn't seem to be a common size.

Anyone know the size or where I might source one. Jegs list one,but doesn't give sizes, also, not available to ship till the end of the month.

Thanks,
Posted By: skrews

Re: Jesel Belt Drive - 10/21/12 08:54 PM

Get one from Jesel.
Posted By: mopar_mark

Re: Jesel Belt Drive - 10/21/12 09:33 PM

Quote:

Get one from Jesel.



I would of done last week, as was in New Jersey.

If I knew the size, I'm sure I could get one here or one made


Anyway, All sorted now

Thanks
Posted By: QuickDart 502

Re: Jesel Belt Drive - 10/21/12 09:47 PM

Quote:

Quote:

Get one from Jesel.



I would of done last week, as was in New Jersey.

If I knew the size, I'm sure I could get one here or one made


Anyway, All sorted now

Thanks [/quote sorry not trying to hi- Jack your thread but how do you remove the hub off the end of the camshaft.
Posted By: mopar_mark

Re: Jesel Belt Drive - 10/21/12 10:41 PM

Quote:

sorry not trying to hi- Jack your thread but how do you remove the hub off the end of the camshaft.



If your referring to the cam shaft belt drive gear, undo the Left hand bolt on the front, this will allow pulley to come away from the tapered shaft & keyway
Posted By: QuickDart 502

Re: Jesel Belt Drive - 10/22/12 12:19 AM

Quote:

Quote:

sorry not trying to hi- Jack your thread but how do you remove the hub off the end of the camshaft.



If your referring to the cam shaft belt drive gear, undo the Left hand bolt on the front, this will allow pulley to come away from the tapered shaft & keyway

actually it's the tappered hub that holds the sprocket.see pick.

Attached picture 7430186-IMG_20121021_191127.jpg
Posted By: QuickDart 502

Re: Jesel Belt Drive - 10/22/12 12:22 AM

Quote:

Quote:

sorry not trying to hi- Jack your thread but how do you remove the hub off the end of the camshaft.



If your referring to the cam shaft belt drive gear, undo the Left hand bolt on the front, this will allow pulley to come away from the tapered shaft & keyway

actually it's the tappered hub that holds the sprocket.
Posted By: go green

Re: Jesel Belt Drive - 10/22/12 02:14 AM

nope . the key locates the gear.
Posted By: QuickDart 502

Re: Jesel Belt Drive - 10/22/12 05:30 AM

Quote:

Quote:

Quote:

sorry not trying to hi- Jack your thread but how do you remove the hub off the end of the camshaft.



If your referring to the cam shaft belt drive gear, undo the Left hand bolt on the front, this will allow pulley to come away from the tapered shaft & keyway

actually it's the tappered hub that holds the sprocket.see pick.

the sprocket appears to be stuck on the end of the camshaft, guess I'll try a left handed thread bolt and apply a little pressure to see if it will pop it off the dowel pin.

Attached picture 7430668-IMG_20121021_191127.jpg
© 2024 Moparts Forums