Show me your window nets please

Time to install one in my car and looking for ideas.I'm thinking about a swingout also.

I'm guessing you're looking for ways to mount it, rather than just the net itself. There are many ways to mount them, but the best way I've seen is on HEMIFRED's black Duster.
The bottom mount is a fixed steel tube. The top tube has a GM type safety belt buckle welded at the front end, while the back end has a rod end that lets it swing down and out of the way.

Linky no worky Dave

Yes,looking at mounting options and how some of you guys did yours

Hit the refresh. Works now.

Al,

Here is mine.......

#2

Thanks guys,kepp 'em coming

Mine is mounted like DusterDave posted. Mine clips at the top with the factory type seat belt buckle. No generic GM crap in my car. LOL

From the outside.

Al, See Uncle Anthony. Bernie just installed one in the Valiant for me and it works much better than what I had previously. Can't get a pic because the car is in the trailer. The net opens front to back instead of top to bottom and has a specific latch that I like much better than a GM seatbelt latch. Hope this helps.
Rich

Mine is mounted with 3 pieces of steel tubing welded
to the chassis and the same GM seat belt type lock...
the rod on the bottom has clips to keep it in place
and the top rear I slide the rod(with the net on it)
into the tubing and latch the front.... one of these
days I'll change it and use a heim joint on the top
rear so it swings down

1

Thanks you guys for posting up

Quote:

---

Al, See Uncle Anthony. Bernie just installed one in the Valiant for me and it works much better than what I had previously. Can't get a pic because the car is in the trailer. The net opens front to back instead of top to bottom and has a specific latch that I like much better than a GM seatbelt latch. Hope this helps.
Rich

---

Rich,how was the turnarond time??