Posted By: W9 Dart
Dyno numbers are in! - 06/18/12 06:23 PM
The car did what I expected it to do. Max HP 684 MAx TQ 547 my PTC TQ might be a little loose for this combo. It seems to be flashing at around 4500.
Posted By: 540challenger
Re: Dyno numbers are in! - 06/18/12 06:54 PM
684 to the wheels?? and It looks like that is a 3rd Gen. Hemi build you got there correct???
Nice numbers can you tell us more on your engine combo
Posted By: W9 Dart
Re: Dyno numbers are in! - 06/18/12 06:59 PM
68 Dart 270
Cali car
All custom Interior
Built 727 (tranzact) MRVB
PTC 9.5" TC
STR (Tshell k frame)
Wilwoods on all fours
QA1 single adj coil overs
custom tri four link nascar 9" 3.50 gears, detroit locker, strange carrier
325/50/15 & 26x6 tires
Billet specialties wheels
35% tint
Champion radiator 3 row custom fan shroud
complete aeromotive full return fuel system with 20 gal cell eliminator pump, efi bypass reg, 100 micron and 10 micron filter.
All black AN hoses and black AN fitting on everything
Remote mroso oil filter
TTi motor mounts
TTi headers 2" primary
TTi 3" exhaust X pipe with Borla mufflers
Dave Webber Modern Muscle 6.1 forged Hemi
6.1 ported heads, 625 pac springs, titanium retainers, locks, etc.
Custom comp cam 229/234 598 lift 113las
2.8 Kenne Bell supercharger
Posted By: Al_Alguire
Re: Dyno numbers are in! - 06/18/12 09:21 PM
So this begs the question when will we see some on track results??
Posted By: W9 Dart
Re: Dyno numbers are in! - 06/18/12 10:49 PM
Thx fellas, Track will be as soon as I get back from Alaska next wk. I'm sure I have a ton of suspension tuning to do.
Posted By: Dartin
Re: Dyno numbers are in! - 06/18/12 11:07 PM
Very impressive numbers and a beautiful car! Win/Win! Good luck at the track.
Randy
Posted By: ProSport
Re: Dyno numbers are in! - 06/19/12 12:23 AM
One of my most favorite cars ever! Can't wait to see the MPH that thing runs in the 1/4.
Posted By: instigator
Re: Dyno numbers are in! - 06/19/12 12:25 AM
converter seems to pull the motor down pretty good.....tried a bigger or no filter to see what you may be leaving on the table?
Posted By: MR_P_BODY
Re: Dyno numbers are in! - 06/19/12 01:15 AM
I would duct the air intake to the front of the radiator
yoke to try and get a bit cooler air... being its not
running a inner cooler
Posted By: MR_P_BODY
Re: Dyno numbers are in! - 06/19/12 01:56 AM
I didnt see it.... but I would still run the inlet
out front.. cooler air is always better
Posted By: Dunnuck Racing
Re: Dyno numbers are in! - 06/19/12 01:57 AM
With a 3.50 gear ratio,if you break the tires loose you will have your hands full!
Thanks for sharing the info,pretty impressive!
Please keep us posted.
Keith
Posted By: Dunnuck Racing
Re: Dyno numbers are in! - 06/19/12 02:29 AM
Just going back to when I have had a car with gearing like that. Once you break them loose they seem to spin forever. But when you have a car with a lot of gear, the tire speed catches the engine speed and recovers better. Similar to trying to do a burnout with an old truck with grannie geared low. It just likes to launch.
Keith
Posted By: W9 Dart
Re: Dyno numbers are in! - 06/19/12 02:34 AM
I'm gonna run down the 1/8 fri and see how she does.
Posted By: 1967dartgt
Re: Dyno numbers are in! - 06/19/12 03:13 AM
Wow, some nice numbers, how much boost was it making now? What track are you trying to make it too? Good luck, and hope you got a cage in because you are going to need it!!
Posted By: jim sciortino
Re: Dyno numbers are in! - 06/19/12 03:24 AM
Cool ride and nice numbers.
Posted By: hemi67s
Re: Dyno numbers are in! - 06/19/12 02:36 PM
Impressive, congrats! Good luck on friday.
Posted By: Leon441
Re: Dyno numbers are in! - 06/20/12 12:30 AM
ADRL at Dinwidie this weekend. Doubt they will have any test and tune this Friday.
Leon
Posted By: BPE
Re: Dyno numbers are in! - 06/20/12 12:43 AM
"more fun than the day the hogs ate grandma!"
What the hell does that mean?
Is that a good thing?
Awesome build by the way!
Rod