Moparts

Procharger Road Ruiner coming together.. AGAIN.

Posted By: Kam*Kuda

Procharger Road Ruiner coming together.. AGAIN. - 05/09/12 03:14 AM

Here is how it sits today
The engine is in the build process but the innercooler is set up and found a spot for the trans cooler

Attached picture 7197981-cuj67o4kc5.jpg
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/09/12 03:42 AM

Procharger mock in place. and still in the process to finish

Attached picture 7198028-pro-mock1.jpg
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/09/12 03:49 AM

Trial assembly
A little off the top please

Attached picture 7198040-initialmockup.jpg
Posted By: Labratt

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/09/12 04:34 AM

Posted By: WannaRunner

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/09/12 06:01 AM

Nice paint! do you have the paint code?
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/09/12 01:57 PM

It is the new Challenger Tor Red. The Code is R3 i believe

Attached picture 7198351-DSC_0063.JPG
Posted By: WannaRunner

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/10/12 07:10 AM

Thanks!
Posted By: firefighter3931

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/10/12 12:14 PM

Nice....can't wait to see it make a pass !

Ron
Posted By: Hitman340

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/10/12 01:44 PM

your doing a nice job.This is going to be a sweet ride when you done.
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/13/12 03:29 AM

Cutting the deck,

Attached picture 7203819-IMG_1736.jpg
Posted By: rickraw

Re: Project Road Ruiner starting to come together.. AGAIN. - 05/13/12 03:34 AM

real nice
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/04/12 10:24 PM

Looking more like an engine
WIth Dwayne Porter prepped EZ heads, Victor EFI intake beening massaged for the runners to fit the heads

Attached picture 7236198-500-3.jpg
Posted By: 70blackfish

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/05/12 05:01 PM

NICE...How much HP you Aiming for?

Say Hi to Dwayne for me..
Posted By: firefighter3931

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/06/12 05:01 PM

Nice Rob !

That 500in motor with 10-12 lbs of boost should make some nice power



Ron
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/07/12 01:47 AM

I am planning 750-850hp. Less to start and more with a pulley change and water injection
Posted By: Blown 68 R/T

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/07/12 06:38 PM

Lookin good Rob,
Mine is coming along, slower than i'd like but thats life.Wiring is done just have to go over everything then fire it up!
On another note we're movin to Belleville, I'll be closer now, we'll have to go to TMP and maybe you could come up to Shannonville, I'll be like 10 min away from there.
Posted By: ZIPPY

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/07/12 06:42 PM

Beautiful paint, a vintage megablock and boosted!
Doesn't get any better than that, looks great
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/08/12 11:51 AM

Quote:

Lookin good Rob,
Mine is coming along, slower than i'd like but thats life.Wiring is done just have to go over everything then fire it up!
On another note we're movin to Belleville, I'll be closer now, we'll have to go to TMP and maybe you could come up to Shannonville, I'll be like 10 min away from there.



Thats awesome. Thats not far away at all.


Quote:

Beautiful paint, a vintage megablock and boosted!
Doesn't get any better than that, looks great




Thanks so much Zippy, The project is taking a bit longer than anticipated, but they always do.

I hope to have a N/A Dyno session soon and then peice the procharger together and see what final modifications are required (like the cooling fans)
Posted By: Edge

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/09/12 04:25 PM

Your car is coming together very nicely ! Should be a great combination.
Posted By: 00snake530

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/10/12 03:01 AM

awesome build, im near the same stage with my 67 red satellite.. 512" stroker with rpm heads and efi victor, f1-r procharger, what fuel injection are you planning to use?
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 06/10/12 04:26 AM

Quote:

awesome build, im near the same stage with my 67 red satellite.. 512" stroker with rpm heads and efi victor, f1-r procharger, what fuel injection are you planning to use?



Yes, I remember your build
I am running the FAst Xfi system
Aeromotive Eliminator Pump
83 lb injectors
Victor intake, with a little prepping by dwayne porter
Big Mouth Throttle body on an elbow
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 05:41 AM

Mostly together.
Not sure how much boost it will make but the pulleys will have the little D1X procharger maxed out

It has been a long process. I hope to get it out a number of times this year and get some seat time.



Attached picture 7476930-procharger-mounted.jpg
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 05:42 AM

Dropped off for EFI tuning

Attached picture 7476933-runner-trailer2012.jpg
Posted By: 69CHARGERMD

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 01:02 PM

Nice
Posted By: 80arrow

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 02:26 PM

Looks awesome
Posted By: Blown 68 R/T

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 02:30 PM

Road ruiner??
Where did you go for tuning Rob? Is it the same guys you refered me to?
Lookin forward to some T&T at TMP with both 68's!!
Posted By: Kam*Kuda

Re: Project Road Ruiner starting to come together.. AGAIN. - 11/26/12 03:18 PM

Yes, Kevin, Rob Z is doing the efi tuning
© 2024 Moparts Forums