Posted By: Kam*Kuda
Dana 60 Carrier Bearing - Any differences?? - 04/21/12 05:52 AM
I need to get a set of carrier bearings to install a new locker into the Dana 60
Is there any difference in bearings
Ratech
Strange
others?
Posted By: WheelsUp73
Re: Dana 60 Carrier Bearing - Any differences?? - 04/21/12 06:07 AM
Make sure the bearing is made by Timkin and you are good to go! Koyo are low budget.
Posted By: Clanton
Re: Dana 60 Carrier Bearing - Any differences?? - 04/21/12 01:07 PM
i just took my gears out if you want me to look at the pn# on the bearing for ya.
Posted By: B G Racing
Re: Dana 60 Carrier Bearing - Any differences?? - 04/21/12 09:10 PM
The standard Dana 60 uses the same carrier bearing with the exception of the Strange Dana-S series which uses a 382A race instead of the 382S.The 382A allows for the needed clearence for the adjusters on the S-series.
Posted By: 440Jim
Re: Dana 60 Carrier Bearing - Any differences?? - 04/21/12 09:41 PM
Dana 60 bearings(cone)/races(cup)
Description (Cup / Cone), , , , , , ,,,, ID(in), OD(in), Width
Pinion(large) HM803110/HM803146, 1.625, 3.500, 1.187
Pinion(small) HM88510 / HM88542 , 1.250, 2.875, 1.563
Spool sides 382S / 387A, , , , , , ,,,, 2.250, 3.8125, 1.656