Posted By: Cuda_Mike
Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 02:06 AM
Does anyone offer pushrods 9.015" to 9.030" long off the shelf for use with a .670 roller cam with K-950 springs or must I order custom ones?
Pushrods For Roller Cam RB 9.015" to 9.030" Long ?
Posted By: rickraw
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 02:25 AM
go online & check out to see if any company's have that size on the shelf.
Posted By: Cuda_Mike
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 02:40 AM
I've been looking on-line, was hoping someone might know. Looks like many companies offer them in .050 increments...
Posted By: MR_P_BODY
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 02:47 AM
Quote:
I've been looking on-line, was hoping someone might know. Looks like many companies offer them in .050 increments...
Usually .050 is the jump that they make for self
Posted By: rickraw
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 02:56 AM
ur probably going to have them made up.
Posted By: Stanton
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 03:55 AM
What's the difference whether they're off-the-shelf or custom made?!?!? Delivery time would be about the same!
Posted By: Cab_Burge
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 05:02 AM
You have a PM 
Posted By: reknapp52
Re: Pushrods For Roller Cam RB 9.015" to 9.030" Long ? - 04/19/12 07:22 PM
I believe the Comp Cams ones that I just bought are 9.030--but I haven't measured them yet.
