Posted By: Performance Only
HEY SIXPACKGUT - 03/15/12 08:18 PM
any interest in trying one of these?
HEY SIXPACKGUT
Posted By: sixpackgut
Re: HEY SIXPACKGUT - 03/15/12 08:25 PM
very nice! where is the one for this one?
Posted By: Performance Only
Re: HEY SIXPACKGUT - 03/15/12 08:26 PM
is that the rectangular one or the trapezoidal one?
the one in the picture is rectangular. which car will it fit?
the one in the picture is rectangular. which car will it fit?
Posted By: sixpackgut
Re: HEY SIXPACKGUT - 03/15/12 08:30 PM
Quote:
is that the rectangular one or the trapezoidal one?
the one in the picture is rectangular. which car will it fit?
thats just sitting there for a picture.
that one you posted is for the black car
Posted By: BradH
Re: HEY SIXPACKGUT - 03/15/12 08:44 PM
Forget the shiny pieces; post more pics of the GF wearing nothin' but a 5-pt harness! 
Sorry... just can't seem to let that image fade away.
Sorry... just can't seem to let that image fade away.
Posted By: sixpackgut
Re: HEY SIXPACKGUT - 03/15/12 09:02 PM
OK,i took it off. crapping on Dan's thread
Posted By: Dodgeguy101
Re: HEY SIXPACKGUT - 03/15/12 09:07 PM
Quote:
Forget the shiny pieces; post more pics of the GF wearing nothin' but a 5-pt harness!
Sorry... just can't seem to let that image fade away.
Missed the 5 point harness, can you put that back up, I think I need a new one.
Posted By: hemi-itis
Re: HEY SIXPACKGUT - 03/16/12 12:17 AM
YIKES 
Posted By: gch
Re: HEY SIXPACKGUT - 03/16/12 02:47 AM
Hubba Hubba!Speaking of intake........nevermind. 
Posted By: Ari440
Re: HEY SIXPACKGUT - 03/16/12 03:05 AM
is this for the sheetmetal manifold
Posted By: Performance Only
Re: HEY SIXPACKGUT - 03/16/12 03:15 AM
here's a pic during the roughing in phase.
Posted By: sixpackgut
Re: HEY SIXPACKGUT - 03/16/12 04:22 AM
Quote:
is this for the sheetmetal manifold
yes, Dan was having a buy one get one free sale so he is making one for the sheetmetal ram and one for the hemi. the carbs i'm using are really for the hemi
Posted By: Ari440
Re: HEY SIXPACKGUT - 03/16/12 05:15 AM
Quote:
OK,i took it off. crapping on Dan's thread
what did you take off?
are the carbs 750s
is the bolt pattern to be able to fit carbs sideways
Posted By: Performance Only
Re: HEY SIXPACKGUT - 03/16/12 11:12 AM
Quote:Quote:
is this for the sheetmetal manifold
yes, Dan was having a buy one get one free sale so he is making one for the sheetmetal ram and one for the hemi. the carbs i'm using are really for the hemi
right
Posted By: sixpackgut
Re: HEY SIXPACKGUT - 03/16/12 03:23 PM
Quote:Quote:
OK,i took it off. crapping on Dan's thread
what did you take off?
are the carbs 750s
is the bolt pattern to be able to fit carbs sideways
i took off pictures of Brad's GF. Actually the only time she was at Brad's house, he wasnt there
these plates are made to match the carb bores. it could made to mount sideways carbs if that is something you wanted or needed. not something i wanted. the original lid is already made that way for doms and is really nice piece. carbs are 650s
Posted By: Scamp408
Re: HEY SIXPACKGUT - 03/16/12 03:31 PM
Dan since you are messing with the mill how bout wipping me up some frt end bushings 
Posted By: BradH
Re: HEY SIXPACKGUT - 03/16/12 05:28 PM
Quote:
i took off pictures of Brad's GF. Actually the only time she was at Brad's house, he wasnt there
And neither was my WIFE.
Posted By: Performance Only
Re: HEY SIXPACKGUT - 03/16/12 05:53 PM
Quote:
Dan since you are messing with the mill how bout wipping me up some frt end bushings
i could do that. need some dimensions though.
Posted By: Scamp408