my gen 3 hemi build

I'm building a street hot rod (street/strip car)68 Dodge dart. I have all the suspension complete (coil overs all the way around, 4 link, rack and pinion steering, built 727 manual reverse valve body, 9.5" converter, custom stainless 2" stepped headers, 325/50/15 Mt drag radials, 2005 truck ECU, 15 gal fuel cell with eliminator fuel pump, wilwoods on all 4 corners)

AJ supplied complete 6.1 from top to bottom
Dave Webber supplied 6.1 ported heads, 625 PAC springs, retainers, push rods, cometic .051 gaskets, custom 22?/23? 6?? lift on a 114, forged drop in pistons with rings.
Edelbrock E-force supercharger running a 9-10 lbs

I have not been happier with AJ and Webber on this build.. Popeyes Hemi (Jeff) will help me do the pistons and cam next wk... I'm looking to have it tuned by mid April.. Not sure what it's gonna run nor do I really care.. I'm sure it will get in the low 10's possibly 9's if I can get the bugs worked out. Hoping to go hang out with u guys at some events and run the local test and tune.. and most importantly beat up on ujokin! lol

With 10lbs of boost I hope to be over the 600rwhp range.. thoughts?

Jason

looking foward to hearing the results. think you will go over 600 easy

the car sounds awesome also. have any pics?

I have a ton of pics but I have so many photobucket wont let me post anymore b/c i'm over the limit and they want me to pay!

Sounds nice forsure. I seen that edelbrock deal on HP TV I think. Your drag radials will be screaming from all the TQ that blower will make

Yup should be a fun dependable car. Similar combos running the same 10lb of boost run 10.3 in a 4300 charger...

Wow. Really looking forward to hearing more on this one, enjoy !

I think these Gen 3 Hemi engines should make great hot rod builds. Keep us posted on how you got it all to work.
I put these builds in 2 catagories:
1) Using factory computer/car (2005 ish?)
2) Retro fit into other cars with aftermarket computer, ignition, wiring harness, etc.

How is the fit of the gen 3 hemi in the a body?
must be tight whith the headers.
thinking of one down the road for my sons 70 dart stock k frame manual steering.

PICTURES WOULD BE GREAT!

THANKS JIM

Here are a few pics of the car.. my photbucket account sux b/c they say I have too many pics and want me to pay... I will get more tomorrow.

Quote:

---

How is the fit of the gen 3 hemi in the a body?
must be tight whith the headers.
thinking of one down the road for my sons 70 dart stock k frame manual steering.

PICTURES WOULD BE GREAT!

THANKS JIM

---

I don't think his chassis will resemble yours...

Quote:

---

I have all the suspension complete (coil overs all the way around, 4 link, rack and pinion steering,

---