Posted By: 9 Sec Phill
Need shortened dana axels, who to buy from? - 02/15/12 01:49 AM
Any out there better then others? Thanks...Phill
Need shortened dana axels, who to buy from?
Posted By: MR_P_BODY
Re: Need shortened dana axels, who to buy from? - 02/15/12 02:02 AM
All out racing or not... if street/strip go with
Dutchman from Dr Diff
Dutchman from Dr Diff
Posted By: 9 Sec Phill
Re: Need shortened dana axels, who to buy from? - 02/15/12 02:09 AM
So I need to call Cass.
Posted By: AndyF
Re: Need shortened dana axels, who to buy from? - 02/15/12 02:11 AM
DoctorDiff has his own line of axles these days.
Posted By: Belvedere500ci
Re: Need shortened dana axels, who to buy from? - 02/15/12 02:25 AM
Whats up Phill!!! How you been man?! Strange is what we use.. Except the Top sportsmen car.. That has Mark Williams.. Never had a problem to date.
Posted By: 65dragnet
Re: Need shortened dana axels, who to buy from? - 02/15/12 03:22 AM
MOSER 
Posted By: ProStDodge
Re: Need shortened dana axels, who to buy from? - 02/15/12 04:09 PM
I have used Moser in the last 4 cars I have built. Always worked well. ProMax is a dealer (as well as a few others on this board) for them.
Posted By: Jacob Pitt
Re: Need shortened dana axels, who to buy from? - 02/15/12 04:17 PM
When I got my Challenger backhalved I bought new Strange axles to replace the other Strange axles that I had been beating on for six years. Have always had good dealing with them.
Posted By: Biginchmopar
Re: Need shortened dana axels, who to buy from? - 02/15/12 04:45 PM
Strange!
Posted By: dogdays
Re: Need shortened dana axels, who to buy from? - 02/15/12 04:51 PM
www.doctordiff.com
Mark Williams if you're a serious racer.
A friend and I went up to Mark Williams shop in Colorado to buy a new set of gears for his Dana 60 and have them installed. What a place! I was in shock at all the beautiful stuff. The gears and setup weren't any more expensive than any other rear end shop. It was worth it just for the experience.
R.
Mark Williams if you're a serious racer.
A friend and I went up to Mark Williams shop in Colorado to buy a new set of gears for his Dana 60 and have them installed. What a place! I was in shock at all the beautiful stuff. The gears and setup weren't any more expensive than any other rear end shop. It was worth it just for the experience.
R.
Posted By: MagnumExpress
Re: Need shortened dana axels, who to buy from? - 02/16/12 02:24 AM
Moser Engineering the only way to go!!
Posted By: dragram440
Re: Need shortened dana axels, who to buy from? - 02/16/12 03:39 PM
I have been running the Dr. Diff axles in my 8 3/4 and now I am going to get another set for the dana I am building. Very nice quality!
Posted By: DoctorDiff
Re: Need shortened dana axels, who to buy from? - 02/16/12 04:35 PM
I handle Dutchman and Strange, as well as my own brand. Between the 3 brands, I can provide axles for almost any application.
Posted By: VernMotor
Re: Need shortened dana axels, who to buy from? - 02/16/12 04:49 PM
I have been running the Dutchman axles from dr.diff. in my coronet for 3-4 years now. last time I had them out. they look good.
Posted By: 8urvette
Re: Need shortened dana axels, who to buy from? - 02/16/12 06:41 PM
im running mark williams,
rb- 4 speed, street car- will have some track use too.
rb- 4 speed, street car- will have some track use too.