A little bit of engine porn

Posted By: Irun5snd8th

A little bit of engine porn - 02/03/12 01:12 AM

Just got my new Wiseco pistons today. These are the shelf stock stroker pistons for the 4" crank. Gas ports, coated skirts, etc. Should end up being about 13:1 on my engine. You just cant imagine this ind of quality for less than $600 especially for a Mopar. Kudos to the Wiseco guys.

Attached picture 7050685-IMG_0196(598x800).jpg

Posted By: Clanton

Re: A little bit of engine porn - 02/03/12 01:21 AM

Wiseco

thay are local to me and i use them in my engine.

Posted By: Stroker Scamp

Re: A little bit of engine porn - 02/03/12 01:46 AM

nice, what are you running for heads?

Posted By: sixpackgut

Re: A little bit of engine porn - 02/03/12 01:48 AM

very sexy. great price too

Posted By: sunroofgtx

Re: A little bit of engine porn - 02/03/12 02:44 AM

Vic is going to design me some Hemi Pistons soon(I hope). American made. Doesn't get better than that !!

Posted By: 408strokerdart

Re: A little bit of engine porn - 02/03/12 04:02 AM

Quote:

Just got my new Wiseco pistons today. These are the shelf stock stroker pistons for the 4" crank. Gas ports, coated skirts, etc. Should end up being about 13:1 on my engine. You just cant imagine this ind of quality for less than $600 especially for a Mopar. Kudos to the Wiseco guys.

Wow, gas ports and coated skirts for under $600! Sounds like a good deal to me.What do they weigh?

Posted By: Al_Alguire

Re: A little bit of engine porn - 02/03/12 07:50 AM

Nice...love the price too. My last two sets of pistons were $2200 and $1400

Posted By: LA360

Re: A little bit of engine porn - 02/03/12 11:24 PM

What ring pack are they running?

Posted By: 69dart

Re: A little bit of engine porn - 02/04/12 03:49 PM

I thought you were building a new Hemi?

Posted By: 340B5

Re: A little bit of engine porn - 02/04/12 10:31 PM

I just spent $950 w/shipping for custom Wiseco's.

That oughta make you feel good about 600.

Top ring down a little extra on yours?

Posted By: SLEDGEHAMMER

Re: A little bit of engine porn - 02/04/12 11:11 PM

Quote:

Top ring down a little extra on yours?

I also was looking at that.

That's sexy for the nawwws!!!

Posted By: Irun5snd8th

Re: A little bit of engine porn - 02/05/12 04:59 AM

http://www.wiseco.com/PDFs/Stoker340.pdf
Upper ring down a bit to accommodate for nitrous I believe. I have Edelbrock heads.
Shawn I have an engine. I just havent gotten the answers that I am looking for on the problems they have been having. So I am just rebuilding what I have and gonna concentrate on some chassis stuff this year.

Posted By: RAY1969CARS

Re: A little bit of engine porn - 02/06/12 05:09 AM

Quote:

Just got my new Wiseco pistons today. These are the shelf stock stroker pistons for the 4" crank. Gas ports, coated skirts, etc. Should end up being about 13:1 on my engine. You just cant imagine this ind of quality for less than $600 especially for a Mopar. Kudos to the Wiseco guys.

what heads are you useing with them?????

Posted By: Irun5snd8th

Re: A little bit of engine porn - 02/06/12 06:19 AM

Edelbrocks. This is not much more than a replacement of parts in my current engine. I was already running the Ross pistons that brought me to about 12.5 CR. Havent even done the math but it looks like I may get a little more out of these. No biggie though cause I am not looking for more power out of this. Just fresh parts.