Posted By: Bigfury
Stage 6 Heads valve location - 01/13/12 01:15 PM
Had no luck with the search.Time to order pistons.Installing Mopar Stage 6 heads on top of a low deck.Is the valves in standard location on the Stage 6 heads? Need valve relieves in the pistons.Thanks in advance.
Posted By: Dunnuck Racing
Re: Stage 6 Heads valve location - 01/13/12 01:18 PM
The location is same as production,but make sure they make the reliefs big enough for radial clearence with the bigger than production valves.
Keith
Posted By: BradH
Re: Stage 6 Heads valve location - 01/13/12 05:13 PM
Scott - The valve reliefs in most aftermarket pistons will be fine for your build w/ my old Stage VI heads; just verify that they're designed for at least a 2.14" intake / 1.81" exhaust. That's even on the small side these days since many pistons are designed around 2.19"+ intake valves used on some other common aftermarket heads (e.g. Indy).