Stage 6 Chapman CNC Maxwedge what intake offset?

What offset intake rocker arm is needed for a Stage 6 CNC Chapman Maxwedge Head?

Thanks Brian

These heads are going on a low deck motor (400) I've had replies from .485 offset to .85" offset on the rockers. But it seams like a couple of guys are using Victor .65 offset anyone have any real world experiance?
Thanks Brian

I actually have a 400 that im building for a friend that has those exact heads. The T&D rockers have .750 offset for the intakes.

Hughes intakes worked fine on my 517 low deck with the 285 Champans, made sense for me to just use the Indy's since I already had a good/new set of rockers. Had to clearance the intake runners a bit but not what I'd consider 'excessive'