Stage VI heads?

Posted By: Mopar_Ray

Stage VI heads? - 12/18/11 03:07 PM

A buddy of mine asked me to do some research on the CNC ported MP Stage VI heads. First thing I looked for prices. Every thing I find online says about $2500.00 and say "CNC-Ported Stage Aluminum VI Cylinder Head" each. Am I mis understanding and that means a set of heads or for 1 head?

Posted By: Bishop

Re: Stage VI heads? - 12/18/11 03:32 PM

I Don't know what they list for but seen a pair on Detroit MI Craigslist for $1500

Brian

Posted By: Mr.Yuck

Re: Stage VI heads? - 12/18/11 04:17 PM

$2500 each would seem to be too much, even for the port work. I'm guess that's a set. Call and ask.

Posted By: BloFish

Re: Stage VI heads? - 12/18/11 04:28 PM

That would be for a pair

Posted By: Anonymous

Re: Stage VI heads? - 12/18/11 06:19 PM

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

Posted By: fishy340

Re: Stage VI heads? - 12/18/11 06:22 PM

theres a set of bare stage vi heads 500 for both brandy new on racingjunk.com click engine part,then scroll to heads,and type in mopar

Posted By: hemi-itis

Re: Stage VI heads? - 12/18/11 06:30 PM

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

Posted By: Anonymous

Re: Stage VI heads? - 12/18/11 06:33 PM

Quote:

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

Sorry, still asleep.

Posted By: hemi-itis

Re: Stage VI heads? - 12/18/11 06:37 PM

Quote:

Quote:

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

Sorry, still asleep.

No,it's YOUR Hemi-itis that has takin' control of your brain

Posted By: Mr.Yuck

Re: Stage VI heads? - 12/18/11 06:56 PM

Quote:

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

i was gonna say I bought my 440 complete w/ ported stage VI heads and solid roller cam for 3k...

Posted By: Mopar_Ray

Re: Stage VI heads? - 12/18/11 08:01 PM

Yes, I'm talking abouut wedge heads. The CNC ported heads that Mopar performance is currently offering. So thats for a set of heads?

Posted By: BloFish

Re: Stage VI heads? - 12/18/11 08:15 PM

Yes.

Posted By: camdog440

Re: Stage VI heads? - 12/18/11 08:18 PM

from mopartsracing.com... it says EACH

I'd call to be sure.

CNC-Ported Stage VI Aluminum Cylinder Heads

These unique CNC-ported heads feature special machining for longer valves, allowing for a deeper port in the critical short turn area. With port profiles developed by Chapman Racing, these exclusive heads feature state-of-the-art design for maximum flow over the entire lift curve. Available in two versions: standard port window with a 260 cc intake port, or Max Wedge with a 286 cc intake port. Both set the standard in Big Block fl ow efficiency for their respective port size. P4876383 requires the use of Rocker Shaft Stands (P5007742), 5.40" length, and 11/32" diameter valves.
P4876386 CNC-Ported Stage VI Aluminum Cylinder Head 2.25" Intake, 1.81" Exhaust (Max Wedge) 2420.00 each

P4876383 CNC-Ported Stage VI Aluminum Cylinder Head 2.18" Intake, 1.81" Exhaust 2420.00 each

Posted By: JohnRR

Re: Stage VI heads? - 12/18/11 10:29 PM

Quote:

Yes, I'm talking abouut wedge heads. The CNC ported heads that Mopar performance is currently offering. So thats for a set of heads?

If the description says EACH then the price is EACH and that is not surprising coming from MP. I remember when the Chapman CNC heads came out, they were very close to $2500 each ... BARE

Posted By: camdog440

Re: Stage VI heads? - 12/18/11 10:47 PM

Couldn't you get into a set of B1's at that kind of $$$ ?

Posted By: hemi-itis

Re: Stage VI heads? - 12/19/11 12:38 AM

Quote:

Couldn't you get into a set of B1's at that kind of $$$ ? [/quote

Does not pay to get them new from ma mopar,not for that kinda money.Lotsa choices in getting head for that $$$$$$
Find a used set of CNC'd chapman's for a good price hopefully with T&D's rockers and they perform well

http://www.moparmusclemagazine.com/techa...st_numbers.html

This chart will get you scratchin your,,,,,,,,,HEAD
http://users.erols.com/srweiss/tablehdc.htm#Chrysler_Big_Block

Posted By: tboomer

Re: Stage VI heads? - 12/19/11 02:22 AM

I don't know why anyone would pay that much for a head..For your buddy...Look in the race parts for sale here. 440Jim has a good pair for sale..

Posted By: ZIPPY

Re: Stage VI heads? - 12/19/11 02:46 PM

Discontinued, ns1, gone, see ya, adios, sayonara, etc etc

Posted By: JohnRR

Re: Stage VI heads? - 12/19/11 04:22 PM

Quote:

Couldn't you get into a set of B1's at that kind of $$$ ?

Chrysler doesn't care , they price them how they want .

Posted By: Gumbydammit

Re: Stage VI heads? - 12/19/11 04:35 PM

Quote:

Quote:

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

i was gonna say I bought my 440 complete w/ ported stage VI heads and solid roller cam for 3k...

Cuz you got a smokin deal

Posted By: BradH

Re: Stage VI heads? - 12/19/11 09:12 PM

I think someone must be confusing standard MP Stage VIs with the limited-production Chapman CNC-ported Stage VIs.

Posted By: Mr.Yuck

Re: Stage VI heads? - 12/19/11 10:18 PM

Quote:

Quote:

Quote:

Quote:

I just bought a set from FHO, used for one dyno session only. Their prices on the web site are $2500 a pair for bare castings and $2500 for all the machining. Tim Banning told me the heads can go $10,000, and I was lucky and got a smoken deal.

They are referring to the wedge heads.

http://www.moparmusclemagazine.com/techa...alve_specs.html

i was gonna say I bought my 440 complete w/ ported stage VI heads and solid roller cam for 3k...

Cuz you got a smokin deal

yes I did and this pig will be running 11.0's in the spring.