Moparts

91 W-350 Bellhousing PN.

Posted By: 500ciDuster

91 W-350 Bellhousing PN. - 10/02/19 05:25 PM

Was wondering what the part number is?

Mitch
Posted By: rbkt65

Re: 91 W-350 Bellhousing PN. - 10/02/19 10:23 PM

check on mopar parts giant.
Posted By: 500ciDuster

Re: 91 W-350 Bellhousing PN. - 10/03/19 11:27 PM

Thanx
Posted By: rbkt65

Re: 91 W-350 Bellhousing PN. - 10/04/19 01:44 AM

10 3/8 clutch w/ a535,a435/833 part number is 4471829
Posted By: 500ciDuster

Re: 91 W-350 Bellhousing PN. - 10/05/19 05:59 PM

Is that the biggest clutch that they offered?
Posted By: scratchnfotraction

Re: 91 W-350 Bellhousing PN. - 10/09/19 02:16 PM

what trans?

in my 85 stepside I have a 93 D350 NV4500 5.9 magnum gas engine bell/use a 19 spline 11" clutch disc /the bell is nv4500 specific and hydro clutch.

IIRC the W350 nv4500 uses same bell and course 10 spline clutch disc gas or diesel? and can be 12"

my other hydro clutch bell is from a 88 v-6 d100 and had a a535 5 speed..it fits the a535/833/833OD/435 4 speeds

I also have a 12" clutch mech bell from a d/w350


if you are a 435 4 speed 4x4 the smaller hydro clutch bell works in the 91 with hydro clutch set up.

all on the shelf if you want part #s for all of them.
Posted By: 500ciDuster

Re: 91 W-350 Bellhousing PN. - 10/09/19 02:31 PM

I'm going to take this one off and check the number, just wanted to put the same one back on & am putting the NP 435 back in
© 2024 Moparts Forums