Posted By: Eggman
Clutch fan studs - 08/11/18 01:41 AM
Does anyone know where i can get the studs and nuts for a clutch fan to mount to the water pump?
Posted By: poorboy
Re: Clutch fan studs - 08/11/18 03:23 AM
The fan attached to the clutch with 5/16" X 3/4" long bolts on my rides. Gene
Posted By: Cab_Burge
Re: Clutch fan studs - 08/11/18 05:11 AM
How about your local Dodge dealer or NAPA store?
Posted By: larrymopar360
Re: Clutch fan studs - 08/11/18 10:07 PM
The fan attached to the clutch with 5/16" X 3/4" long bolts on my rides. Gene
Right. Just get some 5/16" x 3/4" bolts from hardware store. That's what they should use as poorboy wrote.
Posted By: Eggman
Re: Clutch fan studs - 08/12/18 02:24 AM
I have the fan and clutch already together. I was referring to the fan to water pump.
Posted By: poorboy
Re: Clutch fan studs - 08/12/18 07:09 AM
Clutch to water pump use the same 5/16" X 3/4" bolts. The Mopar bolts had the washers attached, but just the bolts work. If your clutch has the slotted openings rather then a round hole, just add the washers to the bolts. Gene
MOPAR used to have studs then went to bolts.
look in the Dorman fastener line for the clutch to wp studs or bolts.
I often grab a 7 blade fan from a GM engine to upgrade the mopar 5 blade fans when I cant find a 7 blade MOPAR fan.
Posted By: ahy
Re: Clutch fan studs - 08/20/18 02:33 AM
On stock or "stockish" setups I run simple bolts. The original had captured semi bell shaped washers. I have also used common grade 5 or grade 8 bolts with small flat washer and lock washer and that works fine also.
If you have a spacer or other situation that wants studs, a good ACE hardware will have them.