79 D150 Ignition Switch

Need a source for the ignition switch with a tilt column. The non-tilt is a common switch but the tilt part number isn't even listed.

https://www.rockauto.com/en/catalog/dodge,1979,w150+pickup,5.9l+360cid+v8,1099841,electrical-switch+&+relay,ignition+starter+switch,4700

NOS Mopar

https://www.ebay.com/itm/NOS-MOPAR-1978-80-DODGE-TRUCK-COLUMN-IGNITION-SWITCH-3747199/142407709273?epid=14002653870&hash=item2128293259:g:7M0AAOSw8lpZOB9w&vxp=mtr

https://www.ebay.com/itm/1978-87-DODGE-TRUCK-RAMCHARGER-POWER-WAGON-TILT-WHEEL-IGNITION-SWITCH-NOS-1217/401466264549?hash=item5d79410be5:g:AAoAAOSwTm9aODea&vxp=mtr

Larry, thanks for the help but it's the pigtail and switch activated by the key that goes to this switch I need.

I saw the non-tilt ones that had some type of harness but none with the tilt ones. I don't know.

This comes up with non-tilt

Everything for '79 D150 WITH tilt looks like this

Same part that I need but for a tilt column, probably because of the different switch.

The Rockauto one above is for tilt. All the ones that look like the one I posted with harness state "non-tilt" so I don't get it either.

If you need the switch you need the part he posted, if you need the mechanism that operates the switch, that's a whole 'nother animal.

The tilt is for sure, a delco style column-switch but that does not mean a chevy switch will work. I'm thinking it's similar and I don't know how hard it will be to obtain, but it is surely different from the straight column style.

Yes the deco style has me wondering if a GM type might be an option.

autozone shows this for tilt Part Number: LS420

...and Advance shows BWD # CS89.

The key in the column on a tilt pulls a rod that connects to the switch under the dash that is attached to the column with two screws.

Do you need the lock & rod assembly? Or the switch attached to the column under the dash? Or the wiring connector(s)? ( Older harnesses had 1 connector, newer there are 2 connections that plug into the switch). Both connectors (one piece or two piece) are part of the dash harness. Gene

Which looks exactly like the one I posted from Rockauto