Posted By: dragon
A pilar gage mount - 09/10/17 01:13 AM
I have a 1999 3500 that I am mounting gages in how are you mounting the gage A pillar to the factory A pillar screws ,glue rivet etc? and where are you running the wires through the fire wall ? thanks
Posted By: J_BODY
Re: A pilar gage mount - 09/10/17 06:04 AM
most gauge pods overlay the existing A pillar and attach with small plastic push pins. There's a plate where the clutch pedal linkage would go through the firewall so if you have an auto that's a handy spot. I have the Xmonitor gauge on my 01. module is under the dash and there is one wire going to the display mounted on the lower A pillar. Easy and non intrusive install.
Posted By: a12rag
Re: A pilar gage mount - 09/18/17 08:07 PM
Check Geno's Garage - they have some nice set ups for pillar gauges . . .