Posted By: Eggman
Spare parts 318 is alive! - 06/17/17 02:21 AM
My "spare parts" 318 is on the road....finally! It's a 1990 roller motor with a whiplash 318 cam,summit house brand intake,Msd dist. And 6a box,e coil,8.5 wires.Hedman long tubes with purple hornie header mufflers for now🙄,727 tranny with a Summit 11" converter,770 Holley street avenger carb,3:55 gears. It's more fun and a lot less maintenance than any other engine I've ever had!
Posted By: Fat_Mike
Re: Spare parts 318 is alive! - 06/19/17 09:49 PM
And all (or most) of that you had laying around collecting dust? Awesome!
Posted By: Eggman
Re: Spare parts 318 is alive! - 06/20/17 01:25 PM
I did have to buy the cam!
how do you like the cam so far?
got my initial set at 14* FBO limiter plate set on 18* total 32* and curb idle set 700 rpm
Posted By: Eggman
Re: Spare parts 318 is alive! - 06/21/17 01:44 AM
Love it! Sounds like a pro stock.
what kind of timing and curb idle you wind up with?
I was thinking of advancing it on the t-chain when it goes in the next 88 police 318 next.
but then again another 5.9 whiplash would be more simple to slam and jam.
Posted By: Eggman
Re: Spare parts 318 is alive! - 06/22/17 12:03 AM
I'm running an Msd pro billet dizzy with no vac advance. I put the bushings in it to run 14 initial and 34 total. Seems to like it!