Magnum flywheel

Posted By: 87MO DAK

Magnum flywheel - 01/19/17 10:26 PM

Quick question
I have a 94 5.2 mag motor with flywheel.
will it work with the factory 833 small block truck bellhousing?
or do i need to get a diff flywheel ?
also what would you recommend for a clutch?
Thanks all

Posted By: 58pwrwgn

Re: Magnum flywheel - 01/20/17 03:41 AM

The magnum should be the 11 inch, 143 tooth flywheel. If you have the aluminum bellhousing, I think you have the 10 1/2 130 tooth flywheel.

Posted By: 70Cuda383

Re: Magnum flywheel - 01/24/17 12:29 AM

Yes. Magnum uses a 143 tooth wheel.

Several options here...are you keeping EFI?

A large bell for the larger wheel will bolt up, but you will have to notch the bell for the crank sensor.

If you have a small bell, a 130 tooth wheel will bolt to the crank. If keeping EFI, you will need a custom flywheel. Geoff Gerko at Gerko enterprises (www.gerkoenterprises.com) can set you up. Also, you'll have to notch the smaller bell too, or Geoff can set you up with a QuickTime shield that is already notched.