08 5.7 PCV valve ?

Hey guys what the easiest way to go about changing the PCV valve on a 08 Ram 1500 5.7?

Thanks

You can do a "how to" search online and find videos showing how. I have done that for a lot of projects.

My 06 has a pcv located to the left side of the throttle body. You have to remove the(hemi)filter housing duct that is connected to the throttle body to access it. You have to twist it to remove the pcv.

The PCV valve (4) is mounted into the top of the intake manifold (1). This is located to the right / rear of the throttle body (2).




1.
The PCV valve is sealed to the intake manifold with 2 O-rings (2).


2.
Remove PCV valve by rotating counter-clockwise 90 degrees until locating tabs (3) have been freed. After tabs have cleared, pull valve straight up from intake manifold.


3.
After valve is removed, check condition of 2 valve O-rings (2).

Pic of pcv valve

I've done it too. YouTube has all sorts of great videos but there are some idiots there as well.