9-1/4 YOKE SIZE

I want to change over to a 1350 style u-joint on the ramcharger. Its a big block 440 sixpac and its not being nice to the lil 7260 u-joints on the rear driveshaft.

I see Randys ring and pinion will sell a 1350 strap style yoke for a Dana 44, but I don't see one for the 9-1/4.

Anyone know what the best way around this is?

Thanks

Ill have the rear shaft made custom so Im not worried about that.

Kasey

Will a Yoke from a 8-3/8 with the 1350 style u-joint and 29 splines work?

I cant fine a outside seal diameter for it.

That's my hickup

29-spline 8 3/4" uses the same yoke as the 9 1/4". If you'll settle for u-bolts instead of straps try Doc Diff.

http://www.doctordiff.com/1350-u-bolt-pinion-yoke-package.html

OK, I have that kit only a 10 spline on my 489 case 8-3/4...

What about the flange at the T-Case? How would I get this to a larger U-Joint?