Posted By: Hotlumpy
92 W150 Factory NV4500 - 02/13/15 05:53 PM
so my 92 W150 came factory with a 5.2 Magnum and an NV4500. Great combo, Clutch Master/Slave Cylinder assembly. Bought the hydraulic assembly from Rock Auto, it fit but won't push the slave cylinder rod out enough to disengage the clutch, or even break the plastic breakaway Tabs that come on the rod to hold it in place. Because the NV4500 was not widely used in 1/2 ton trucks in 92, do I need the 3/4 ton hydraulic assembly, or is there air in the pre-bled system that I got? Did Dodge use a different clutch hydraulics assembly for the 4 speed that came in most 92's?