Posted By: roe
Wheel spacers and adapters - 12/07/14 09:35 AM
Just thought Id pass along some info. I needed to install some spacers on my truck for some new wheels to fit correctly so I picked up a set of 4 from Sixityauto.com. They are 5x5.5 to 5x5.5 and are 1.5" thick. I'll post some pics in a few but they are a well built and fit perfectly. And I got all 4 for $99 instead of all of the other brands that were $80-100 for 2. I wouldnt hesitate to recommend their spacers or adapter.
Posted By: roe
Re: Wheel spacers and adapters - 12/07/14 10:08 AM
Front
Back
Front mounted with loctite.
Posted By: roe
Re: Wheel spacers and adapters - 12/07/14 10:27 AM
Rear mointed with loctite
Posted By: Magnum
Re: Wheel spacers and adapters - 12/07/14 11:34 AM
Did you have to trim the studs?
Posted By: roe
Re: Wheel spacers and adapters - 12/07/14 04:36 PM
No I didn't have to trim the studs at all, which I really liked. If I have to pull them back off I still have full length, usable studs.
Posted By: 85_Ram_4speed
Re: Wheel spacers and adapters - 12/07/14 05:36 PM
Nice. I actually just bought the same deal for a different application. It seemed to be the best option short of having some custom wheels made.
I have zero issues with these style of spacers, I know some people freak out about this stuff. I think a lot of the bad rap is by incorrect or poor installation of said products. Never had regular or this style spacer fail if everything fit and was torqued properly.