'70's Dodge Truck Shocks, What is the Bushing Diameter?

'74 W200 Dodge Truck, what are the inner and outer diameters of the shock absorber mounting bushings. I have some used, but still acceptable shocks, but I believe the existing bushings are too small for this application.

Thanks

Look up a Monroe shock part number for your truck, then use this manual to get the specs. The Mounting End codes are listed on page 76

I use this to find longer, or shorter shocks that will fit custom suspensions I have put together. Like lifting a 73 Fury to clear 32" tires, etc.

http://www.monroe.com/assets/downloads/english/08_MountingLengthSheet.pdf

Thanks. Looks like 11/16 inch bushing inner diameter.