Moparts

From stock to not.

Posted By: moparborn

From stock to not. - 09/13/14 03:40 AM

Finally after collecting up all the parts I needed for the past 2+ years I swapped all the parts over.
A lot of wiring done,a little more to do.
A few misc details to do,some tweaking and tuning.
Yes I know the filters do not match,they will.
I do have to trim away some hood bracing but no skin cutting needed.

Attached picture 8268810-engine.jpg
Posted By: stumpy

Re: From stock to not. - 09/13/14 04:00 AM

With matching blue filters that will be some serious eye candy.
Posted By: redraptor

Re: From stock to not. - 09/13/14 01:04 PM

Holy crap that's wild lookin'! Do you need to run 2 MSD boxes?
Posted By: 85_Ram_4speed

Re: From stock to not. - 09/13/14 03:39 PM

What intake is that? Is it a tunnel ram?

How do you like it on the street and how doe it compare to what you had on it before?

Looks menacing with the filter setup on there.
Posted By: MuuMuu101

Re: From stock to not. - 09/13/14 05:15 PM

All you need now is one turbo per carb...
Posted By: moparborn

Re: From stock to not. - 09/13/14 05:49 PM

The first msd crapped out (first time I ever had one go bad).
Yes it is a Weiand tunnelram but not a hi ram.
Twin turbos would be awsome.
Have not driven it at this time,still small ends to tie up but considering it was near stock (but did run well), I am sure it will be much better.
Posted By: moparborn

Re: From stock to not. - 09/22/14 03:15 AM

Made a short maiden voyage in the truck.
What a difference.
A few more tweaks and mods to do but sounds and runs great.
© 2024 Moparts Forums