WJ GC, pulling the 4.0 from up top.

Posted By: GO_Fish

WJ GC, pulling the 4.0 from up top. - 02/10/14 12:15 AM

2001 GC, 4.0. What's involved in pulling the engine from the top? Rear 2 or 3 cylinders are tucked way back under the cowl. So it appears a steep lifting angle, or much of the front of the truck needs to be removed??

Posted By: GO_Fish

Re: WJ GC, pulling the 4.0 from up top. - 02/12/14 01:58 AM

Anybody pulled a 4.0?

Posted By: Bad340fish

Re: WJ GC, pulling the 4.0 from up top. - 02/12/14 01:59 PM

Not from a we but I have pulled a few 4.0s. Take apart a lot in the front is the best help I can offer.

Posted By: GO_Fish

Re: WJ GC, pulling the 4.0 from up top. - 02/14/14 03:26 AM

Quote:

Not from a we but I have pulled a few 4.0s. Take apart a lot in the front is the best help I can offer.

That's kind of how it looks, don't know if you could pull it steep enough without disassembly. I'll have to check if the radiator support unbolts or not.