92-93 d150/d250 headers?

these are the 79170 2x or 4x4 hedman headers with # 7 tube moved further forward to make room for the LA style starter.(short) should have plenty of room for a mini in there with these.

now to roll the dice on IF they are whats in the pic they used for advertisment purpose.

here are the 79170 hedman truck headers

what do you think? ya or nay ???

if sean/sheldon use long tubes with a magnum/nv4500 in a 88 4x4...this has to be the headers i would think.

any thing else for a 92 is the ram head shortys like a DAK uses.

Yep: Edit again, the SECOND set photoed look like Sean's.
I paged Sean, I'll let you know what he says.

Sheldon

Sean is using a mini starter, he'll try to get some photos today.

Sheldon

thanks, I have a mini starter also.

the #7 tube on the 79080 needs to move over toward fram 2" or move forward 2" so it seems eyeballing it holding the starter aclose to mounted as i can.

I had a set of the 79170 on this truck when i got it, then rplaced with the newer 79080 set.

I just dont see hammering the tube flat or trying to bend it out of the way.

I do know I had to R&R the header with a LA style starter with the 79170 but went to a mini starter and could R&R it with out R&R of header.

I orderd up a set so we shall see in a day or so.

a pic would be awsome if he has the mini on with a set of 79080 hedmans.

thanks for rhe effort and help.

cant wait to row the 5 speed.

i also place who you 2 guys are now.. you son has the bad ass 4x4 rig he ahs been wrenching on for a while now.

I think I have them downsized. Photo 1.

Sheldon

Photo 2.

3.

4. They do look like the 170 headers. Hope this helps.

thank you for the pics, they are worth a 1000 words.

they look almost exact but a couple slight changes maybe.

the pass side looks like a match,

the driver side has the tubes arranged a little different but look close enuff...#7 tube seems to be out of the way of the starter.

I think I am good with the 79170

I am hopeing that changes down the line are the differance between your pics and the advertising pic for 78170 headers.

big help and thank you.

You're welcome. Sean is on Ramcharger Central as Mr Gutsy I believe.

Sheldon

yep and has a BADAZZ RC/Truck

79170 75-91 w150/RC fit the 85 2x truck chassis ans #7 tube is well out of the way for the short LA starter and plenty o room for a mini starter now.

rolled the dice and won for a change.

thanks for the help Sheldon & Sean!

You're welcome, you're going to like the way the truck runs. Sean tore up all three engine and trans mounts doing burnouts with his 35's the first day though.

Sheldon