The custom scoop for my pickup finally showed up. Basically a hemidart scoop raised to 5 inches. It might be too big...
Posted By: turbododgepirate
Re: Hoodscoop finally showed up! - 07/18/13 01:34 AM
A shot from the side. Some trimming for fitment will obviously have to be done.
Posted By: 340SHORTY
Re: Hoodscoop finally showed up! - 07/18/13 02:03 AM
You could always put a handle on it and shovel a lot of snow in the winter..
Posted By: BeEtLeJuIcE !
Re: Hoodscoop finally showed up! - 07/18/13 02:03 AM
Hemi Dart A body ? ... that is what it was sold to you as ? ... SURE looks to me like a way-taller 66-67 Hemi B-body scoop ...
Posted By: hp383
Re: Hoodscoop finally showed up! - 07/18/13 02:07 AM
will you be adding a center post for support on the opening?
I like it. Bigger is better, and you can catch bigger birds!
Posted By: turbododgepirate
Re: Hoodscoop finally showed up! - 07/18/13 06:40 AM
Yup, it's a 66-67 scoop but raised to 5 inches. I do plan at least 2 support posts. I thought it would slope more in the back. But oh well.
Posted By: 85_Ram_4speed
Re: Hoodscoop finally showed up! - 01/31/14 01:37 PM
FYI, you can use a carrige bolt and go from the top of the scoop down into the hood for a cleaner look. Just use a file to make your round hole square to accept the under head of the bolt.
Then you can use a plastic sleeve (or metal)for the bolt to go through to support the scoop underneath so when you tighten it down, it doesn't suck the center of the scoop down like you have.
Posted By: 4dr4x4
Re: Hoodscoop finally showed up! - 01/31/14 07:56 PM
This is the scoop I used on my Crew. My friend Brett has the truck now and he is not a hood scoop guy so he gave it back to me.
Posted By: pinkduster
Re: Hoodscoop finally showed up! - 02/01/14 12:00 AM
Love the OP's truck, but that scoop... I'm just not feelin' it. I've got plans kickin' around in my head to build a similar truck in the future and I know most Mopar guys don't like 'em, but I'm going to build my own steel cowl hood. I'll actually use the original hood skin as the top of the cowl in hopes of keeping that factory center body line.
well I only showed how big a hole my scoop has.
I am looking into making my own Rod Hall Baja hood/scoop for my stepside
but a paint job like this with a lowerd non scoop hood
and here is my 68 Hemi scoop covering the big hole in the hood.
Posted By: BeEtLeJuIcE !
Re: Hoodscoop finally showed up! - 02/01/14 02:02 AM
Sn' ...is that a plastic scoop ?
Posted By: 11secdart
Re: Hoodscoop finally showed up! - 02/01/14 03:11 AM
I really thought about adding a hood scoop to my D150 but ended up putting a Spectre ram air system on instead. Its a nice chrome air cleaner with two snorkels with tubes connected to the air source, I put a 4 inch hole in the radiator support on the left side added a screen and now it pulls fresh air from behind the grille on the other side rather than make another hole and be close to the battery I just connected to the factory air intake box which pulls fresh air from under the turn signal.
Posted By: 11secdart
Re: Hoodscoop finally showed up! - 02/02/14 12:23 AM
Its tucked away in my trailer for the winter and its hard to get to it.