started my cab surgery, maybe ill finish it someday lol

started hacking and whacking on the replacement cab for the white truck, maybe someday when my shop is free again i can finish the drivers side! Believe it or not, the cab on my truck now is in worse shape than this one was,i had to screw down a couple of street signs to keep from having the flintstone mobile! They replacement panels are from jcwhitney,my fiance bought them for me as a surprise "hurry up and get that damn truck done" gift haha. They didn't do such a hot job on measuring for the tranny tunnel or the angle up front where the kick panel is,but a little massaging and it didnt turn out too bad

its a start

some new steel

Just finished doing the same thing to a 85 Dodge..

I just scored a 91 cab with only minor rust hole on driver side floor/rocker area. small spot on roof drip rail.

going to replace my 85 truck cab with the 91 cab for the hydro clutch 5 speed swap.

what kind $$$ did the JCW run for the floor pans? i have to look at those for sure.

repair is looking good so far. more pics plez update.

I got my floor pans for about $80 shipped off Ebay...

thanks! its slowly gettin there, Im hoping maybe this weekend i can at least get the other side fit up, Im in the process of doing a long arm suspension lift for a buddy on his tj wrangler. The panels were alike 100 bucks. I gotta try to find the rear drivers section of the cab, thats my last little battle then the cab is done. Just ordered some new wheels and tires also. Scratchy you will be proud, I got me some fattys! 17x11 billet specialties street lite wheels with 390/40r17 m&h racemasters Ill post some more pics as i get some more done.

Scratchy your goin to a stir stick eh? nv4500? Thatll be a nice upgrade!

Quote:

---

Scratchy your goin to a stir stick eh? nv4500? Thatll be a nice upgrade!

---

yes,I just got the whiplash roller cam in the 85 stepside. soon as I patch up the 91 cab to replace the 85 cab, I plan to swap the 5 speed in with cab off.

then in a couple more weeks, I plan to do a VJ with a whiplash cam going in the 440 truck staying with the 727.

If the 440 comes out I will do another SB whiplash 4 or 5 speed swap with it.

driving the poop out of the 440 truck on the weekends and now the whiplash 318 is the daily driver.

Fat is where its at.