Kickdown linkage options 318 4BBL 84 truck

Quote:

---

& please tell me that im not gonna have to change my throttle cable just going from a 2BBL to a 4BBL?

---

Quote:

---

Does anyone possibly might have some pix of the actual 4bbl truck linkage to have some thing to go by when im out & about looking for parts? lol.

I have the factory 2bbl prebent rod from the truck, is it the same as the 4bbl only the part toward the carb is alittle longer? thought about cuting & threading it to extend it to length.

Here some pics of 2 different throttle brackets refresh my memory on what they fit

Also my top side will be 600 CFM Holley 4BBL & edelbrock peroformer intake manifold if this helps

---

the bracket on the right looks like a tall 4-v bracket. it would use the long flat bar on a stock intake/q-jet.

the 2-v rod is bent different and shorter. but could be used with a longer carb to bellcrank flat bar/rod.

for a holley you will need the mopar/holley throttle adaptor and then use a stock throttle stud.

I have used 2 of the flat rods bolted together to make a carb to bell crank flat bar long enuff to work.

here is what I have. 2 complete set ups for a 85 4-v truck.

have some extra flat bars,short or long.