Posted By: jonesboys
jeep control arms suspension - 02/28/13 05:48 AM
new to jeeps i bought 1998 wrangler the suspension ht wise looks stock control arms are round and look as if they slide grease fittings as if aftermarket all joints what do i have i dont know
Posted By: 76dodgeboy
Re: jeep control arms suspension - 02/28/13 08:33 AM
I believe stock is stamped but I could be wrong but that's all I ever see or stock
Posted By: ViperDave
Re: jeep control arms suspension - 02/28/13 11:24 AM
stock was stamped. round bars are definitely aftermarket. round lowers? or round upper and lowers?
can you post a pic
the radius arms are stamped channel steel. after market are fabricated steel tube/bar stock. should be 4 arms 2on top 2 on bottom coil springs for lift. basic 4 link suspension up front with panhard rod.
rear should be axle under leaf spring or it went to 4 link coil springs on the rear as well.
does it have a lift kit installed?
2x or 4x4?
will be the same with 2x but a stright tube axle with 4x4 knuckles/spindles.