NOS Spark plug wire terminal ends. 70 E Body

I have been piecing together NOS plug wires for my 70 cuda 440-4 for a while now. Some have come with no terminals. Does anyone have a part number for the straight, 90 bent terminal ends or could they only be gotten with the wire sets. is there a close substitute??
i would like for it to look as stock as possible.

spark plug end or dist cap end?

Not sure about the spark plug ends, but I know you can get the dist cap ends thru most any auto parts supplier. made by standard if I remember right ( straights or 90's )

is there a difference between the bent ends on the distributor vs. spark plug side. I would need some of both if there are differences. Do you have the standard part #?? I should be more clear. i dont need the rubber boots just the brass terminals.