Moparts

What is this mounting pad for? E body.

Posted By: PAINT IT BLACK

What is this mounting pad for? E body. - 10/26/11 07:45 PM

This is a random pic from the net. But the question is what is this raised pad (inside the red circle) on the passenger inner fender for on a 1970 Cuda? Emissions parts?

Attached picture 6889598-b05022.JPG
Posted By: gtx6970

Re: What is this mounting pad for? E body. - 10/26/11 07:47 PM

where the receiver drier mounts on a factory air car
Posted By: PAINT IT BLACK

Re: What is this mounting pad for? E body. - 10/28/11 09:04 PM

Thanks Bill. You are a fountain of knowledge! Ya know... you ought to consider making a living off these old cars....
Posted By: hemi68charger

Re: What is this mounting pad for? E body. - 10/28/11 09:54 PM

Quote:

where the receiver drier mounts on a factory air car




Same as for the '71/'72 B-bodies.. (remember Whitey Steve?)
Posted By: PAINT IT BLACK

Re: What is this mounting pad for? E body. - 11/01/11 02:57 PM

I do... super sweet ride.
Posted By: A12

Re: What is this mounting pad for? E body. - 11/01/11 04:31 PM

Quote:

where the receiver drier mounts on a factory air car





not to go too far OT but could you get A/C with a /6 engine in an E-body ('70 Challenger)?
Posted By: DAYCLONA

Re: What is this mounting pad for? E body. - 11/01/11 05:21 PM

Quote:

Quote:

where the receiver drier mounts on a factory air car





not to go too far OT but could you get A/C with a /6 engine in an E-body ('70 Challenger)?







I would think so on the Challenger, as I parted out a very original 1970 /6 AC Barracuda years ago B5/B5/B5 interior, benchseat car, with power windows, and just about all the factory bright trim you could option the car with

Mike
Posted By: azmopar

Re: What is this mounting pad for? E body. - 11/01/11 05:53 PM

Quote:

Quote:

where the receiver drier mounts on a factory air car





not to go too far OT but could you get A/C with a /6 engine in an E-body ('70 Challenger)?




i had a 71 6 cyl challenger that had fact a/c
Posted By: gtx6970

Re: What is this mounting pad for? E body. - 11/01/11 06:27 PM

Quote:

Quote:

Quote:

where the receiver drier mounts on a factory air car





not to go too far OT but could you get A/C with a /6 engine in an E-body ('70 Challenger)?







I would think so on the Challenger, as I parted out a very original 1970 /6 AC Barracuda years ago B5/B5/B5 interior, benchseat car, with power windows, and just about all the factory bright trim you could option the car with

Mike




Agreed,
I parted out a extremly rusty 225 six 1970 challenger
factory air, column auto , six way seat and luggage rack. but manual steering and brakes though

B5 no vinyl top and with blue cloth interior( buckets and no console) this was at least 10 years ago, probably closer to 15

friend of mine put the engine in his boat, I sold off the six way seat and several other pieces and sent what was left to the crusher
Posted By: A12

Re: What is this mounting pad for? E body. - 11/01/11 07:12 PM

Quote:

Quote:

Quote:

Quote:

where the receiver drier mounts on a factory air car





not to go too far OT but could you get A/C with a /6 engine in an E-body ('70 Challenger)?







I would think so on the Challenger, as I parted out a very original 1970 /6 AC Barracuda years ago B5/B5/B5 interior, benchseat car, with power windows, and just about all the factory bright trim you could option the car with

Mike




Agreed,
I parted out a extremly rusty 225 six 1970 challenger
factory air, column auto , six way seat and luggage rack. but manual steering and brakes though

B5 no vinyl top and with blue cloth interior( buckets and no console) this was at least 10 years ago, probably closer to 15

friend of mine put the engine in his boat, I sold off the six way seat and several other pieces and sent what was left to the crusher




I have this one and now I realize it had A/C, power steering, bucket seats, console/floor shift Torqueflite, white vinyl roof, white interior and is that T5 or T7??......selling it locally (cheap too ) and should have mentioned it was a Southern A/C car


MikeR

Attached picture 6898422-DSC03940rs.jpg
Posted By: lahatte

Re: What is this mounting pad for? E body. - 11/02/11 04:02 AM

A12, can you send me an email about your barracuda?
Posted By: A12

Re: What is this mounting pad for? E body. - 11/02/11 01:50 PM

Quote:

A12, can you send me an email about your barracuda?




Actually a '70 Challenger not a Barracuda.
Posted By: A12

Re: What is this mounting pad for? E body. - 11/02/11 03:00 PM

Clay you have a pm


MikeR
Posted By: HemiRick

Re: What is this mounting pad for? E body. - 11/03/11 09:20 PM

I have a complete 70 Challenger slant 6 car with AC.
© 2024 Moparts Forums